TengTools TC803N 3 Quick Start Quide

DO'S AND
 Keep it covered
o Use the Teng Tools tool box covers or another suitable
cover to protect the tool boxes when they are not being
used.
 Make it secure
o If you are building a stack system use the Teng Tools
TCF01 and TCF02 fixing brackets and fixings provided to
secure each component to the stack
 Water and chemical damage
o If any liquid spills on to the paint surface inside or outside
the tool box clean it off immediately to protect the paint
surface
 Watch your weight
o Spread the weight of tools between the drawers and put
the heavier tools in the lower drawers
 Don't overload your tool box
o Never overfill drawers or put too much weight in one
drawer
 Do not lift more than you should
o Follow established rules and guidelines – if it is more than
25 kilos you should not lift it on your own
 Don't climb on the tool boxes
o Tool boxes are for storing tools do not use them as a
ladder
 One drawer at a time
o Be aware of the balance of your tool box, opening more
than one drawer at a time can cause it to tip over
 Do not shake the tool boxes about
o If the tool box has to be transported in a vehicle it should
be fixed down firmly as the drawers, wheels and welding
points can all be damaged by being bounced round
o When wheeling over an uneven surface be careful as this
can also lead to damage particularly if the tool box is
heavily loaded.
DONT'S OF TOOL STORAGE
7