Corona Lighting DT-1 Quick Start Manual

7 DAY - INDOOR MINI DIGITAL TIMER - MODEL DT-1 (T-FIDT)
You can program your timer to power electrical devices on or off automatically, allowing you to plan ahead and save electricity. Please read this
manual carefully FIRST in order to get the most out of your device.

USING YOUR TIMER

Before you begin, plug the digital timer into a standard power outlet and
let the battery charge for 5-10 minutes, before first use.
Once charged, insert the power plug of your electrical device into the power
outlet located on the side of your timer. Then using a pen, or paperclip, press
and release the RST (Reset) Button. The LCD display screen should turn on
after several seconds.
Press the Timer ON/AUTO/OFF button, "ON", "AUTO", "OFF" will display on
the LCD.
ON
- Power is always delivered to connected devices. Timer will skip setting
programs.
AUTO
- Use the setting programs to determain when power is delivered to
connected devices.
OFF
- No power is delivered to connected devices. Timer will skip all setting
programs.
FEATURES:
 Single Outlet Control
 Battery backup to preserve your settings in case of power failure.
* NOTE: Your daily timer is designed for indoor use only.
PACKAGE CONTENTS:
 Digital Timer
 Owner's manual with warranty information.

SETTING THE TIME

Before using the digital timer it must display your local time. To set the time , please follow the instructions below
1. Press and hold the Week/Time Button, until the day of the week (~3-5 seconds) on the top of your LCD Display screen flashes. By tapping the
ADJ (adjust) button, you can cycle through the days of the week (Mo- Monday, Tu- Tuesday, We- Wednesday, Th- Thursday, Fr- Friday, Sa- Satur-
day, and Su- Sunday). Once you have selected the current day of the week, press the Week/Time button once to confirm the selection.
2. Confirming the day of the week, will cause the hour digit(s) to start flashing on the LCD display screen. Tapping the ADJ (Adjust) button, will
cycle through the hours of the day (default is a 24-hour format). Confirm the current hour by pressing the Week/Time Button once.
3. Confirming the day's hour, will cause the minute digits to start flashing on the LCD screen. Tap the ADJ (adjust) button, to cycle through the
hour's minutes (00-59). Once you find the local time's current minute, press Week/Time button once to confirm.
4. With the minute confirmed, the text on the LCD display screen should now all be solid, displaying your local time and day of the week.

SETTING UP PROGRAMS

In order to synchronize your timer to turn on and/or turn off an electrical device on a scheduale, a program will need to be set.
Your timer gives gives you the option to set a total of 12 total programs, labeled 1,2,3,4,5,6,7,8,9,A,B, and C. To set a program follow the instruc-
tions below:
1. Press the PROG and WEEK/TIME buttons simultaneously to enter program set up mode. The LCD Display Screen will show "1 ON --:--:--:".
This display inidcates you are inputting time information for Program 1, and it will turn your electrical device on.
2. Press and hold Week/Time (2-3 seconds) until day text on top of the LCD display begins to flash. Pressing the ADJ (adjust button) will cycle
through the day schedules:
(MO, TU, WE, TH, FR, SA, SU): Your timer will power on your electrical device every day of the week.
(MO), (TU), (WE), (TH), (FR), (SA), (SU): Your timer will power on yout electrical device on the single, selected day.
(MO, TU, WE, TH, FR): Your timer will power on your electrical device on weekdays.
(SA, SU): Your timer will power on your electrical device on Saturday and Sunday.
(MO, TU, WE, TH, FR, SA): Your timer will power on your electrical device every day except Sunday
(MO, WE, FR): Your timer will power on your electrical device on Monday, Wednesday, and Friday.
(TU, TH, SA): Your timer will power on your electrical device on Tuesday, Thursday, and Saturday.
(MO, TU, WE): Your timer will power on your electrical device on Monday, Tuesday, and Wednesday.
(TH, FR, SA): Your timer will power on your electrical device on Thursday, Friday, and Saturday.
Once you have the selected day(s) of the week you would like the timer to power on your electrical device, press the WEEK/TIME button to confirm
your selection.
A QUICK LOOK AT YOUR DEVICE:
LCD Display
Screen
Prog. Button
RST Button
Week/Time
Button
Timer
On/Auto/O
Button
ADJ
Button
Power
Outlet