Page 1
USER'S MANUAL Refrigerator Water Filter FIN-15 REPLACES FILTERS: LG LT700P KENMORE 9690...
Page 2
PART 1 FINVIE OVERVIEW FINVIE is top quality brand of water filter, our manufacturer is one of only two companies' export filters have passed NSF certification, we have top production technology and professional machine, adopt the better materials into the filters for great filtration effect.
Page 3
INSTALLING THE FILTER IN A BOTTOM FREEZER REFRIGERATOR 1. Remove the top shelf. If the top shelf, which is located below the water filter, is in the highest position,it will need to be removed. This can be done in two simple steps: (...
Page 4
3. Remove old water filter. Pull the old water filter downward and turn it counter-clockwise to pull it out. Make sure to rotate the filter down completely before pulling it out of the manifold hole. 4. Install new water filter. Take a new water filter out of its packaging and remove the protective cover from the o-rings.
Page 5
5. Remove trapped air. Now that the filter is replaced, dispense 2.5 gallons of water to remove trapped air and contaminants from the system. Depress and release the dispenser pad for cycles of 30 seconds ON and 60 seconds OFF, rather than dispensing continuously.
Page 6
NOTICE To reduce the risk associated with property damage due to water leakage: 1. Read and follow use instructions before installation and use of this system. 2. Installation and use must comply with all state and local plumbing codes. 3. Do not install if water pressure exceeds 100 psi (6.8 bar). If your water pressure exceeds 60 psi (4.1 bar), you must install a pressure- limiting valve.
Page 7
PART 4 FQAS Q: The water is coming out dirty/gray a er I installed the filter. Is this normal? A: Yes that is normal. There is a carbon block inside the filter and sometime during shipping the filter gets knocked around and some of that carbon gets loose.
Need help?
Do you have a question about the FIN-15 and is the answer not in the manual?
Questions and answers