Advertisement
Quick Links
TOBi™ PI Wi-Z
Performance Indicator and Event Logger
Quick Installation Guide
S47-0180 Revised 10/13/2020
Safety Instructions
WARNING
BATTERIES CONTAIN LETHAL VOLTAGE LEVELS.
INSTALLATION AND SERVICING MUST BE PERFORMED
BY QUALIFIED PERSONNEL.
IMPORTANT: SAVE THESE INSTRUCTIONS!
READ AND FOLLOW ALL INSTRUCTIONS BEFORE
INSTALLING, OPERATING, OR SERVICING TOBI. ANY
DEVIATION CAN CAUSE SERIOUS AND PERMANENT
DAMAGE. FAILURE TO FOLLOW THE INSTRUCTIONS
WILL VOID THE WARRANTY.
Do not touch un-insulated parts of the output connector or
battery terminals. A possibility of serious electrical shock
exists.
Never smoke, use an open flame, or create sparks in the
vicinity of the battery. Ventilate well when the battery is in an
enclosed space.
Lead-acid batteries contain sulfuric acid, which is caustic
and can cause chemical burns to the skin. Refer to the
battery manufacturer's instructions for safe handling of
batteries. Use proper personal protective equipment. Do not
get in eyes, on skin, or on clothing. In cases of contact with
eyes, flush immediately with clean water for 15 minutes.
Seek medical attention immediately.
Care should be observed when using tools on or around the
battery to avoid shorting the battery. Do not lay tools on top
of the battery.
Advertisement
Summary of Contents for Charging Technologies TOBi PI Wi-Z
- Page 1 Safety Instructions WARNING BATTERIES CONTAIN LETHAL VOLTAGE LEVELS. INSTALLATION AND SERVICING MUST BE PERFORMED BY QUALIFIED PERSONNEL. IMPORTANT: SAVE THESE INSTRUCTIONS! READ AND FOLLOW ALL INSTRUCTIONS BEFORE INSTALLING, OPERATING, OR SERVICING TOBI. ANY DEVIATION CAN CAUSE SERIOUS AND PERMANENT DAMAGE. FAILURE TO FOLLOW THE INSTRUCTIONS WILL VOID THE WARRANTY.
-
Page 2: Package Contents
TOBi™ PI Wi-Z package contains the following items: TOBi™ PI Wi-Z This Warranty Agreement entered between Charging Technologies Inc, "CTI", and the (6) #10 Self-tapping Stainless-Steel Screws Original End User in respect to CTI’s battery charger control / retrofit kits for industrial ... -
Page 3: Hardware Installation
Introduction: Hardware Installation This Quick Installation Guide is for the installation There are 8 leads coming from the Tobi PI Wi-Z: of the Tobi Wi-Z only. See the Tobi Wi-Z Software User Guide for instructions on programming and 1. Negative Post (black wire) calibrating the Tobi Wi-Z. - Page 4 4. Attach the strap thermistor to the strap halfway between the BROWN ORANGE wires by first 9. Secure the Tobi to the battery, strap, or cable in a drilling a 5/32” pilot hole in the strap. Attach the ring convenient location. The ideal location is set between terminal of the thermistor to the strap using one of the two inter-cell straps.
- Page 5 Wi-Fi networks. The rated distance for data transfer WARNING: To satisfy FCC RF exposure requirements for is 100 feet from the Tobi PI Wi-Z to the PC. Each Tobi PI Wi-Z mobile transmitting devices, a separation distance of 20cm...