Related Manuals for StrongLite ERGO-PRO
Summary of Contents for StrongLite ERGO-PRO
- Page 1 ERGO-PRO MASSAGE CHAIR OPERATION INSTRUCTIONS (REV.10/07) FOLLOW THESE INSTRUCTIONS TO SET-UP. REVIEW PHOTOS 1 & 2 and 3 TO LEARN THE COMPONENTS OF THE ERGO-PRO...
- Page 2 FOLLOW THESE STEPS IN SEQUENCE TO ASSURE PROPER SET-UP AND ADJUSTMENT. STEP 1: OPENING THE ERGO-PRO A. Release the bungee that is holding the chair closed by pulling out and down on the ball found in the center of the rear support plate. See Photo 4.
- Page 3 2. Raise the chest support cam lever (Photo 7) and adjust the chest Chest Support support to a comfortable position. Cam Lever Then push down on the cam lever to the locked position. Photo 7 3. Flip the arm support cam lever to the unlocked position and adjust the arm support to a horizontal Support position then flip the cam lever to the locked position,...
- Page 4 C. If you want to use the chair without the knee rests, we recommend that you place the seat adjustment plate in the upper position. This will give a near level seat position, which is suitable for a ‘feet-on-the-floor’ sitting position. D.
- Page 5 this process with the other rear leg and leg extension, see Photo 12. Be sure to set both leg extensions at the same height. Photo 13 shows the legs fully extended in the tallest position. WARNING: BE SURE THE TWO BUTTONS ARE PROTRUDING THROUGH THE REAR LEGS AND FULLY ENGAGED BEFORE USING THE CHAIR.
- Page 6 B. To change the face rest position, unlock the face rest cam lever and adjust the face rest to the appropriate angle. See Photo 6. If the client is thick chested and short necked you can also lift the face rest to meet his or her face, this is done by lifting up on the face rest base plate while unlocked.
- Page 7 To use the Ergo-Pro carrying case place the chair in the unzipped case with the seat side of the chair towards the pocket and Stronglite logo. Be sure the wheels stick through the slit in the bottom of the case. The chair may be towed on its wheels or carried by the...
- Page 8 MAINTAINING YOUR ERGO-PRO CHAIR We at Stronglite have designed and built the ERGO-PRO chair to be long lasting and trouble free. All the exposed nuts are locking to help prevent loosening. All of the pivot joints are close tolerance to eliminate movement and reduce wear.
Need help?
Do you have a question about the ERGO-PRO and is the answer not in the manual?
Questions and answers