Advertisement
Quick Links
WONLINE
W O N L I N E
Thank you for purchasing Wonline product. All Wonline products are
carefully engineered and factory tested for durability under normal
conditions. We develop our products for simple installation.
Follow our instruction to help you easily install your Wonline Vanity Set.
Model: USBR4621
nbepeach@hotmai.com
After-sales Email:
www.bestuhom.com
Assembly video Link:
Customer Service Phone Number:
678-926-3988
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for WONLINE USBR4621
Summary of Contents for WONLINE USBR4621
- Page 1 Customer Service Phone Number: Thank you for purchasing Wonline product. All Wonline products are carefully engineered and factory tested for durability under normal conditions. We develop our products for simple installation. Follow our instruction to help you easily install your Wonline Vanity Set.
- Page 2 Description Left Side Board Three-in-one Connector Right Side Board Connect board 3 Wood Plug Connect board 4 Shelf Screws ST4x14 Bottom board Connect board 7 Slider Connect board 8 Connect board 9 Inset Hinges Door 10 Door 11 Overlay-partition Hinges Drawer front Left side board for drawer Handle1...
- Page 3 Step1 Keep pressing here,then pull out to devide the slide. 180°...
- Page 4 Step2...
- Page 5 Step3 M4x22 Adjust the screws as shown on the sketch map to ensure all the door gaps are in the same level.
- Page 6 Step4 M4x20 If the drawers are not in the same level,please adjust the screws in the drawer box. Step5 WALL WALL...
- Page 7 Step6 Install the basin on the cabinet with glue. Put into use after 24 hours.
Need help?
Do you have a question about the USBR4621 and is the answer not in the manual?
Questions and answers
Need assembly instructions for a 24.inch.vanty. usbr4181
1. Prepare the Parts – Ensure you have all the parts listed in the manual, including boards, connectors, screws, hinges, and sliders.
2. Assemble the Frame – Attach the left side board (1), right side board (2), and various connect boards (3, 4, 7, 8, 9) using the three-in-one connectors (18) and wood plugs (19).
3. Install the Bottom and Shelves – Secure the bottom board (6) and shelf (5) in place.
4. Assemble and Install Drawers – Attach the left and right side boards for the drawers (13, 14) to the drawer front (12) and secure with screws. Add sliders (21) to ensure smooth movement.
5. Attach Doors – Fix doors (10, 11) using inset hinges (22) and overlay-partition hinges (23). Adjust screws if necessary for proper alignment.
6. Install Handles – Attach handles (24) using M4x22 screws.
7. Adjust Drawer Alignment – If drawers are not level, adjust the screws in the drawer box.
8. Attach the Basin – Secure the basin on top of the cabinet with glue and allow it to set for 24 hours before use.
This answer is automatically generated