EFSEN UV BARx1 Safety And Users Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Safety and User Manual

Version 2.2

ENGLISH

Table of Contents

Need help?

Do you have a question about the UV BARx1 and is the answer not in the manual?

Questions and answers

Summary of Contents for EFSEN UV BARx1

Page 1 Safety and User Manual Version 2.2 ENGLISH...
Page 2: Table Of Contents
Safety and Health ............................ 2 Please watch the Safety Instruction & User Guide video ............4 Clothing and safety for the use of UV BARx1 ..................5 Operation – How to use the UV BARx1 ....................6 Maintenance ............................8 Disclaimer - Safety ..........................
Page 3: Safety And Health
UV-C lamp installed emitting radiation at 254nm. UV-C radiation, even in small doses, can cause eye- and skin hazards. UV BARx1 must not be used if it is defect or malfunctioning in any way. Unintended handling and/or use of UV BARx1 or using UV BARx1 in a defect state, can cause danger to the user or to other people in the area.
Page 4 100ºC when operating the UV BARx1 for a length of time. Be aware that the UV lamp housing of the UV BARx1 as well as metal surfaces near the lamp could be warm. Take precautions and be careful to avoid burns.
Page 5: Please Watch The Safety Instruction & User Guide Video
Please watch the Safety Instruction & User Guide video It is important that you watch and understand our video guide. We will teach the operator step by step how to use the UV BARx1 correctly and safely. Please follow this link: www.efsen.dk/products/uv-disinfection/uv-barxone/safety-and-user-guide...
Page 6: Clothing And Safety For The Use Of Uv Barx1
2. Safe and proper use a. Make sure that all humans within a distance of 10 m from UV BARx1, the source of UV-C radiation, are equipped with suitable protection of eyes and all skin. b. Visually check the UV BARx1 housing for damages and the correct mounting of the UV lamp inside the socket.
Page 7: Operation - How To Use The Uv Barx1
Keep UV BARx1 in 50-100mm distance of object/surface to be treated. c. Pan UV BARx1 over objects/surfaces at 20 cm/s., this corresponds to using 3 seconds on a keyboard. d. As safety feature the UV BARx1 switches off automatically after 15 minutes. You can reactivate it right away.
Page 8 3. End of use a. When finished with use of UV BARx1 turn OFF by pressing the round button. b. DO NEVER LEAVE UV BARx1 TURNED ON! c. Remove the cable from the wall plug so electricity is disconnected. d. Now, it is safe to remove face shield, gloves and protective clothing.
Page 9: Maintenance
Use gloves - do not touch the UV lamp with your hands and fingers. d. Clean the UV lamp with Isopropyl Alcohol on a lint-free cloth. e. The outside case of UV BARx1 can be cleaned with slightly wet cloths and soap. 2. Changing the UV lamp a.
Page 10 Then insert the 4 pin connector by gently pressing it downwards until it clicks into fixed position. k. Check that the UV lamp works by starting UV BARx1 (Attention! Be protected from UV light and turn the lamp away from persons).
Page 11: Disclaimer - Safety
Disclaimer - Safety Safety is critical in relation to the use of UV BARx1, as the product is emitting UV-Clight, and can seriously hurt and damage eyes and skin. EFSEN UV & EB TECHNOLOGY aim through information to assure that our customers understand all safety issues and we advise on how to use the UV BARx1 safely.
Page 12: Eu-Declaration Of Conformity
EU-Declaration of Conformity Identification of manufacturer: EFSEN UV & EB TECHNOLOGY Skovlytoften 33 DK-2840 Holte Denmark This declaration of conformity is issued under the sole responsibility of the manufacturer. The object of the declaration: UV disinfection tool, type BARx1, version 2.2 The object of the declaration described above is in conformity with the relevant Union harmonisation legislation: Reference no.
Page 13 References to other technical specifications: Reference Title Assessment of lighting equipment related to human exposure to EN 62493:2015 electromagnetic fields Signed for and on behalf of EFSEN UV & EB TECHNOLOGY Holte, 27 July 2020 Flemming Madsen General/Technical Manager Product: UV BARx1 version 2.2...