Download Print this page

Xytron XY SOLAR WIFI PIR CAM Schematic Diagrams page 2

Solar panel schematic diagram

Advertisement

1pcs solar panel 3 meters Cable,
1pcs Manual for Solar Panel ,
screws and small parts.
Specification
Built-in battery capacity
Maximum output
Charging
Solar charging output
Solar charging current
Support three boot modes
Triple
Battery
Protection
Power management function
Standard condition
Cable length
Bracket
Charging completion time
Installation Angle
Indicator status
Power-on indication: Press the power button for 1 second, and the 4 blue lights will be on for 4-5 seconds.
Solar Panel
2 x 18650 lithium battery,)
5V/1.3A,Output over current protection, short circuit protection
Solar charging / external input power charging (5V)
1.6W
320mA
1.It detects that the solar output is greater than 0.2W.
2.Press the button to manually boot
3.Check load automatically boot
1.Over-discharge protection, the battery voltage is lower than 3.3V, cut off the
discharge circuit.
2.Over-current protection, the charging voltage reaches 4.2V, and the charging is
automatically cut off.
3.Temperature protection, stop charging at high temperature and low temperature
(> 65℃,<2℃)
1.Stop the battery from entering the invalid state of charge.
2.More than 91% of the power output conversion rate, greatly reducing the loss of
finite power.
1000W/㎡;25℃;AM1.5
3 meters
M6 Screw interface
The weather is sunny for about 5 days
Directions facing north, 45 degrees

Advertisement

loading