Modern display Brilliant Instruction Manual

Led tree

MODERN

DISPLAY

1. Remove the tree stand from the plastic bag and pull the legs open.

Insert the screws and place the stand in the location where you want

your tree to be displayed. (We recommend near a wall outlet)

2. Remove the green pole protectors from the end of each pole section

3. Place the bottom section (A) into the stand and hand

tighten the bolts provided.

4. Release the bottom row of branches by untying the

string and proceed to shape one branch of that row at a

time utilizing the shaping tips on the back of these

instructions. When you are done with all of the branches

in the row, pull another string and continue.

TIP - You may want to use a little WD-40 on the pole of each section before you slide it into the section

below it. This lubrication will make it easier to disassemble the tree at the end of the season.

5. Place section (B) into (A). Find the extension cords from each of

the sections and plug them together per the Assembly Diagram

included. Pk: :1se nc!e that it is not necessary to unplug any of the

light sets on each individual branch.

6. Release the bottom row of branches on section (B) by untying

the string and proceed to shape one branch of that row at a time

utilizing the shaping tips on the back of these instructions. When

you are done with all of the branches in the row, pull another string

and continue.

If your tree came in 3 sections we recommend shaping the tree top in your

hand prior to placing it into the top section of branches. When your tree top

is ready place it into section (8), find the extension cords from each of the

sections and plug them together per the Assembly Diagram included.

Versa Tree instructions - If your tree is 9' tall we have included a

second stand in the carton. After you hav e completed sections (A)

and (B), place section (C) into the smaller stand. Follow the

instructions (4) above and then find the extension cords from each

of the sections, plug them together per the Assembly Diagram

included and follow the shaping tips. Finally, when you have

shaped, lit and perhaps even decorated section C simply pop it up

onto the tree.

Table of Contents

Need help?

Do you have a question about the Brilliant and is the answer not in the manual?

Page 1 MODERN DISPLAY 1. Remove the tree stand from the plastic bag and pull the legs open. Insert the screws and place the stand in the location where you want your tree to be displayed. (We recommend near a wall outlet) 2.
Page 2 Once your section A is securely in the tree stand where you plan to set up the tree, only untie or release the bottom red string to release the bottom row of branches. (This will keep the upper rows of branches out of the way while you progressively shape one row at a time.) Starting at the back of your first branch, fan each needle into a different direction similar to the 9:00 to 3:00 positions on a clock.
Page 3 Assembly Diagram 4 section tree 3 section tree Your tree has been furnished with a dimmer switch to adjust the brightness of your lights. Simply plug the cord coming from the bottom of your tree into the female end of the cord on the dimmer and the wall plug into the other.