Page 1
Section I. Introduction What is ScioBot 1.0? ScioBot 1.0 is an introductory robotics kit that through experimentation with DC motors, a prototyping breadboard, and a DC power source, will teach you some basics of DC motor function and applied electronics. These components, paired with the unique and upgradable ScioBot chassis platform creates a fun and interactive robotics project for beginners of all ages!
ii.
Page 2
Section II. Building ScioBot 1.0 Assemble the main chassis Required Parts and Components: • 2x Wooden Sticks • 1x Battery Mount • 1x T Connector Step 1: Slide the battery mount about halfway onto the first wooden stick by inserting the wooden stick through the slots on the battery mount.
Page 3
Use the slots in the motor mounts to attach the wheel assemblies to the main chassis. It does not matter if the motors are oriented on top of the wooden stick or underneath. Just make sure they are both the same, otherwise you will find that your ScioBot 1.0 is lopsided! iv.
Page 4
If they are too far away, rotate the battery holder so that the wires are pointing towards the breadboard. v. Wire the ScioBot 1.0 Introduction: When following these wiring instructions, do not worry which wires you use. You will not harm your ScioBot by connecting wires incorrectly.
Section IV. Summary Congratulations on completing the ScioBot 1.0 build! Enjoy your robot and experiment with different wiring configurations to learn how different applications of electric currents affect the operation of DC motors. You have also learned the basics of using a breadboard to prototype an electronics project. Breadboards are an essential tool when working and experimenting with electronics and engineering.