Copy - Yamaha PORTATONE PSR-5700 Authorized Product Manual

The Custom Accompaniment Programmer

7 COPY

Purpose:
Copies a specified measure or range of measures to a dif-
ferent location within the same track.
22
Procedure:
Use the and buttons to switch between the three
display screens, and the left or right [-] and [+] buttons in the
various screens to specify the track number (Track), the
number of the first measure of the range to be copied
(TopMeas), the number of last measure of the range to be
copied (LastMeas), and the number of the measure (Meas) to
which the data is to be copied.
Once the track numbers and measure numbers have been
selected, press the [+] button below "Execute" on the right
side of the third display screen to actually execute the copy
operation.
Immediately after execution "Undo" will appear above the
right [-] button, and that button can be used to undo the copy
operation if it was executed by mistake. The undo function is
only available until the next operation is performed.
Notes:
A copy operation overwrites the data from the beginning
of the specified destination measure with the data from the
source measure(s). Previous data in the overwritten measures
is therefore lost.
The COPY function cannot be used with tracks containing
preset data.