Advertisement
Table of Contents
Log Stand
Manual
LogRite's log stand attachment can be placed on either our cant hooks or peaveys.
This attachment allows you to roll a log onto the tool itself. The tool and log stand
then hold the log up off the ground so that a cut can be made safely through the
log without cutting into the ground. The log stand works equally well with both the
peavey and cant hook and then can be removed so that it is not in the way when
using your cant hook or peavey for moving logs.
101 Industrial Park Road
Vernon, CT 06066
www.logrite.com
800-631-4791
Advertisement
Table of Contents
Summary of Contents for LogRite Log Stand
- Page 1 LogRite’s log stand attachment can be placed on either our cant hooks or peaveys. This attachment allows you to roll a log onto the tool itself. The tool and log stand then hold the log up off the ground so that a cut can be made safely through the log without cutting into the ground.
- Page 2 Installation Attaching your log stand to your peavey or cant is very easy. Using the attached allen wrench loosen the four socket head cap screws on the collar. Slide the cant hook or peavey through the collar so that the bottom of the stand is on the oppo- site side of the swinging hook and facing the point.
Need help?
Do you have a question about the Log Stand and is the answer not in the manual?
Questions and answers