EPE Conseil ESI 22 Quick Start Manual

Low frequency detector

Tables for standard operating mode
Low-frequency magnetic and electric
*
Values for
the ESI 22 Detector
Alternating magnetic field *
in nT (= Nanotesla)
Alternating electric field *
in V/m (= Volt per meter)
*
All values are peak values. The values for individual units can slightly vary from the values specified in the table as a result of differences in individual electronic components.
ESI 22 – QUICK START GUIDE
(display shows field strength by means of LED (light-emitting diodes))
fields. Measuring range 16 Hz - 3 kHz.
slightly slightly
unnoticeable noticeable noticeable
Green /
Green Amber 1
Amber 1
< 20 20 to 80 80 to 120
< 6 6 to 15 15 to 20
very
noticeable noticeable noticeable
Amber 1 / Amber 2 /
Amber 2
Amber 2 Red 1
120 to 160 160 to 200 200 to 300 300 to 400
20 to 25 25 to 30 30 to 35
very extremely extremely
noticeable noticeable noticeable
Red 1 /
Red 1 Red 2
Red 2
400 to
> 1000
1000
35 to 40 40 to 50 > 50