Advertisement
Instructions for SafetyHold3
To properly assemble the bead chain and cord loop tension device,
please fl ip this card over for complete step-by-step instructions.
A WCMA 5.2.4 Warning Tag (available from RollEase)
must be fastened to the device prior to shipping.
Th e SafetyHold3 must be secured to the clutch or
headrail to make the shade inoperable without
purposeful action of installer.
Parts Included
Base
SafetyHold
To order more, phone Customer Service
at 800.552.5100 or 203.964.1573
For additional Product Information,
visit www.rollease.com
©2014 RollEase, Inc. 200 Harvard Avenue, Stamford, CT 06902-6320 USA
Guide
Insert
3
TM
Use appropriate
anchors when
installing.
Spring
Screws
03201210000
TM
E
Engineered
Advertisement
Table of Contents
Summary of Contents for RollEase SafetyHold3
- Page 1 A WCMA 5.2.4 Warning Tag (available from RollEase) must be fastened to the device prior to shipping. Th e SafetyHold3 must be secured to the clutch or headrail to make the shade inoperable without Use appropriate purposeful action of installer.
- Page 2 Slide bead chain or cord Slide the same end of the Hook the guide through through base entering bead chain or cord through the end of the bead chain through the rounded part the spring following the or cord. of base following through base.
Need help?
Do you have a question about the SafetyHold3 and is the answer not in the manual?
Questions and answers