Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for L Lab Solderite SGS-2005L
- Page 1 Lead-free soldering system User’s Manual SGS-2005L SGS-2015L...
- Page 2 L Lab L Lab would like to share our idea with our friends. We make something unique and bring the best product to customers. Our products now go to North, Central and South America, West Europe and Southeast Asia, etc. we try hard to offer the best service to customers and we want to share this happiness with our customers.
-
Page 3: Table Of Contents
Table of contents Packing list..................... 3 Feature......................4 Name of parts ....................5 Specification ....................5-6 Setting up.....................6-7 Operation.....................8-9 Replacing Heating Element and Tip............... 10 Trouble-shooting Guide..................11 Chart of Changeable Parts and Parts List..........12-13 Care and Maintenance of Tips...............13 Chart of Tip Shape and Size................14 Before operation, please read the user s manual carefully! CAUTION: When the power is on, the Tip Temperature is between... -
Page 4: Packing List
Packing List Note: *Please check articles listed above after unpacking. Contact with distributor if any not packed inside! Packing List Iron Holder ................... 1Pcs User’s Manual ..................1Pcs Cleaning Sponge .................. 1Pcs Control Station ..................1Pcs Soldering Iron (tip contained) ............... -
Page 5: Feature
Feature Temperature adjustment The temperature adjustment brings a wide range of temperature from -500 (482 F-932 F). This temperature-controlled soldering iron fits any customers for lead-free soldering. The power saving function The power consumption of single station is 20-30W less than other brands’. Temperature calibration function This function help you easy calibrate the temperature difference between set temperature and tip. -
Page 6: Name Of Parts
Name of parts A: Soldering Iron B: Cleaning Sponge Pool J: Location Pin C: Cleaning Sponge ron Cord receptacle D: Iron Holder L: Control Staiton E: 5 Pin Connector M: Power Plug & Cord Assembly Temperature Control Knob N: Power Switch G: LED Indicator O: Back Panel H: Front panel... -
Page 7: Setting Up
Soldering Iron Mode SGI-903S Input Voltage DC 0-30 V Tip to Ground Resistance Less than 2 Tip to Ground Potential Less than 1.8 mV Heating Element Ceramic Heater ESD SAFE Setting up 1.Take the unit out from packing and place it in a suitable place. 2.Tighten the notch at the bottom of the station with location pin on the control box. - Page 8 3.Dampen the Sponge with water and squeeze it dry and place it in the notch of iron holder station. Note: *The sponge, which is too wet or dry, will damage the electric iron and make it unable to be tinned with, and eventually affect soldering. 4.
-
Page 9: Operation
Operation If temperature system is Celsius system , please obey the following steps; If it is Fahrenheit system, please obey the operation step on Page 9 Checking To avoid any unexpected hurting, before starting , you are suggested to make sure: The power button is turned off . - Page 10 Operation If temperature system is Fahrenheit system, please obey the following steps: Checking To avoid any unexpected hurting, before starting , you are suggested to make sure: The power button is turned off . Twist the temperature control knob counterclockwise to the end. The input is: SGS-2005L: AC 180-240V 50/60Hz SGS-2015L: AC 90-125V...
-
Page 11: Replacing Heating Element And Tip
LED Indicator Condition LED Indication System Condition Power on or System supplies heat Orange Temperature reaches set value Green Replacing Heating Element and Tip Replace Heating Element 1. Turn Nut (1) counterclockwise and remove the Tip Enclosure (2), the Tip (3). 2. -
Page 12: Trouble-Shooting Guide
Replace Tip CAUTION: 1) When seeking tip replacement, please select original one of our company. The tip made by another manufacturer may affect soldering performance or damage Heating Element even Control System. 2) We take no responsibility for any problem caused by using the tip made by an other manufacturer. Trouble-shooting Guide Check Problem... -
Page 13: Chart Of Changeable Parts And Parts List
Chart of Changeable Parts and Parts List 1.Parts Chart... -
Page 14: Care And Maintenance Of Tips
2. Parts List Name Part Number Name Part Number Soldering Iron SGI-931 SGI-983S Cord Assembly Tip Enclosure SGI-936 Iron Holder SGX-230 Refer to Soldering Tip User’s manual SGX-290L page 14 SGX-250 Cleaning Sponge Nipple SGI-943S Spring SGI-946 SGX-220 Control station SGX-360 Hex Wrench SGI-950... -
Page 15: Chart Of Tip Shape And Size
Chart of Tip Shape and Size Tip outside diameter 6.5mm...