RattleByte PBR6080 Operating Instructions

RattleByte Multi Region Upgrade Board
Introduction
This RattleByte multi region upgrade board enables your blu-ray disc player to play BD-Video and
DVD-Video discs from all regions. While region free DVD playback is performed automatically, the
blu-ray region must be set manually using the player's original remote control. The following
operating instructions assume that the RattleByte multi region upgrade board has been fitted to the
player.
When the unit is connected to the mains (except
BD30/BD50) or when it is turned on by pressing
[POWER], the currently selected blu-ray region
is briefly displayed on the unit's display.

Setting the blu-ray region

Setting the blu-ray region can only be performed while the unit is in stand-by.
For BD60/BD80, make sure that the Quick Start mode of the unit is set to OFF!
● Press [POWER] to turn off the unit.
● Press [1] to select blu-ray region A.
The selected region is displayed for about
2 seconds or until the unit is turned on.
● Press [2] to select blu-ray region B.
The selected region is displayed for about
2 seconds or until the unit is turned on.
This is the default setting.
www.rattlebyte.com
Panasonic
DMP-BD30 DMP-BD50
DMP-BD35 DMP-BD55
DMP-BD60 DMP-BD80
Operating Instructions
- 1 - © 2010 RattleByte Technologies