Related Manuals for ANMEATE SM935E
Summary of Contents for ANMEATE SM935E
- Page 1 BABY MONITOR SM935E (Digital Wireless Video Baby Monitor With 3.5 inches Color Screen) USER MANUAL CATCH EVERY PRECIOUS MOMENT OF YOUR BABY...
- Page 2 THANK YOU FOR PURCHASING ANMEATE BABY MONITOR. PLEASE ACTIVE AND EXTEND YOUR WARRANTY NOW. (Register within 7 days after receiving your product) To register your product https://anmeate.com/warranty Visit Finished the form on the website That is it! Your product is now active and extend warranty! If you are unsatisfied with your product, please contact us via...
- Page 3 Congratulation! Now you can take care of your babies anywhere and anytime! Please read the user manual before use! Please retain your original dated sales receipt for your to records. For warranty service of your baby monitor, you will need to provide a copy of your dated sales receipt to confirm warranty status.
-
Page 4: Safety Instructions
1. SAFETY INSTRUCTIONS : CAUTION: Keep small parts away from children. Strangulation Hazard: Children can become entangled in cords. Power cords should be kept more than 3 feet away from the crib and baby's reach all the time. Baby monitors and cameras with power cords should never be hung on or near the crib. -
Page 5: Fcc Statements
flow. Keep away from sources of heat: This unit should not be exposed to direct heat sources such as a candle, replace, radiator, heat register, stove or other appliance that emits heat. -
Page 6: Fcc Warning
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television... - Page 7 - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver.
-
Page 8: Warranty Terms
If you have warranty or support issues please contact support@anmeate.com. We will definitely give you a satisfactory solution. 3. Important guidelines for installing your baby monitor... -
Page 9: Product Overview
4. PRODUCT OVERVIEW 4.1 What’s included: 1. Parent unit x 1 4. User manual x 1 2. Baby unit x 1 5. Wall mount shim x 1 3. Adapter x 2 - 07 -... - Page 10 4.2 Parent Unit (Monitor) LCD screen Power/Charging Indicator LED Speaker Brightness-/Left Volume Indicator Power on/o Volume+/Up Pan/Tilt Stand Menu/Exit Reset(under stand) Volume-/Down Talk to Baby DC-Jack Brigthess+/Right 4.3 Baby Unit (Camera) Light sensor Speaker Infrared LEDs Antenna CMOS senor...
- Page 11 4.4 Icons Overview: Signal Volume Zoom Alarm Brightness Night vision Lullaby Talk to baby Camera Battery Temperature - 09 -...
- Page 12 5. PLACEMENT OF THE BABY MONITOR Aim to provide the viewing area: Select a location for the baby unit that provides a clear view of the area you want to monitor, which is free from dust, and is not in line -of- signt to a strong light source or direct sunlight.
-
Page 13: Using The Baby Monitor
6. USING THE BABY MONITOR 6.1 TURN ON THE BABY UNIT: Only use the adapter included in this package. Use the provided adapter to connect the wall outlet with the baby unit. Once the adapter connects then the unit will turn on automatically and the power LED will light up. -
Page 14: Volume Adjustment
7. OSD MODE OPERATION 7.1 PARENT UNIT SCREEN ON/OFF Under the boot state, short press the power key to turn on / o the screen. 7.2 VOLUME ADJUSTMENT Under the boot state, press the UP key to increase the volume. - Page 15 7.5 CAMERA VIEW / SCAN (This function is only available when two or more cameras paired) Press OK key to view / scan camera. During scan mode, the scan icon will be displayed on the top of LCD screen and each paired camera(when more than one camera is paired) will be displayed on the screen for approx 10 seconds and then will automatically change to the next paired camera.
-
Page 16: Menu Operation
8. MENU OPERATION 8.1 ECO SETTING This mode allows you to control the sound activation of your baby monitor. The ECO default setting is OFF. If there is no sound around the camera within 30 Seconds, it will stops transmitting. -
Page 17: Pairing The Camera And Monitor
8.3 LULLABY SETTING You can soothe the baby to sleep by playing a gentle lullaby from the baby unit. 1. Press the Menu/Exit key and the menu will pop up. 2. Press the LEFT key or RIGHT key until the lullaby icon is highlighted. - Page 18 8.6 Video Pan/Tilt 1.Press the shot-cut key enter into the Pan/Tilt mode. 2.Press or key to Tilt the video. 3.Press or key to Pan the video. 4.Press the shot-cut key to exit the Pan/Tilt mode. Note: During the Pan/Tilt mode can not use the navigation key to adjust Volume and brightness.
-
Page 19: Technical Data
9. TECHNICAL DATA 9.1 System General Frequency 2.4GHz FHSS Operation Environment Indoor use only; Temperature: 0-40 °C ; Humidity: 5% to 90% rh. ( relative humidity) Operating Range Up to 900 feet (straight line and open space) Power adapter... -
Page 20: Troubleshooting
10. TROUBLE SHOOTING 1. The power adapters may not be properly connected. Confirm that the camera and monitor are ON. See item 2 “Getting started”, connect the baby unit in the right way. If it is still unconnected, choose another baby unit to connect. -
Page 21: Maintenance
1. The baby unit and parent unit may be place too close together. Keep the distance between parent unit and the baby unit. A high-pitched 2. The volume on the parent unit may be set too high. Noise is Heard Turn down the volume on the parent unit. - Page 22 All rights reserved The features described in user’s manual are subject to modifications without prior notice. WARNING Keep the small parts away from children Printed in China...
- Page 24 Live Chat Support Learn more about ANMEATE, please visit us at https://anmeate.com Scan QR Code & Send to us scan support@anmeate.com www.anmeate.com Printed in China...
Need help?
Do you have a question about the SM935E and is the answer not in the manual?
Questions and answers