Summary of Contents for MYCOVER BLACK EDITION
- Page 1 MYCOVER ® PREMIUM OUTDOOR COVER “BLACK EDITION” INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS Table of contents 1. General information 2. Operating conditions 3. Use (assembly) 4. Safety instructions 5. Transport and storage 6. Cleaning 7. Disposal 8. Warranty...
- Page 2 Incorrect use of the tarpaulin can lead to damage to your motorcycle. This document is available on our website: www.mycover-protection.com in the "FAQ" section. If you have any questions about the use of the cover, please contact: support@mycover-protection.com...
- Page 3 Conditions of use Before you insert the tarpaulin, your motorcycle must be clean (no sand or other dirt, oil, etc.). The friction that occurs when the tarpaulin is pulled on, or the movement caused by the wind, can damage the paintwork, plastic parts, mirrors, rims, etc. or the tarpaulin if the motorcycle is dirty.
- Page 4 The tarpaulin is not suitable for mobile transport of the motorcycle, e.g. on a trailer or similar. 3. Using the Cover (installation) Step 1: • Align the fully extended tarpaulin according to the vehicle. • Starting at the front, place the tarpaulin over the mirrors and the handlebar ends over the front fairing.
- Page 5 To ensure correct operation and to avoid damage to the motorcycle and the tarpaulin, the original condition of the tarpaulin must be maintained. Any optical or technical changes to the tarpaulin are not permitted and will invalidate the warranty. Your motorcycle can become very hot during fast rides, e.g. the manifold can reach temperatures of over 600°C.
- Page 6 It is normal for the colour of the tarpaulin and the logo print to fade over time due to the effects of UV radiation, which has a permanent damaging effect on the material. MYCOVER ® A registered trademark of: Mr.
Need help?
Do you have a question about the BLACK EDITION and is the answer not in the manual?
Questions and answers