ComfortClick Sledgehammer Quick Manual

Sledgehammer Quick Manual
110-240 V AC
UTP
1.Plug-in the power supply and connect your Sledgehammer to the
network via the network cable.
2. Download and install bOS Configurator
bOS Configurator on our web page:
https://www.comfortclick.com/BOS/Software/BOSConfig
3. Connect to the Sledgehammer
3.1
a) Connect locally - make sure that your PC with bOS
Configurator is connected to the same network as your Jigsaw
than follow the steps below.
b) Connect remotely – if you are connecting to your Jigsaw
remotely via the Internet, port forwarding should be enabled on
your router. Port 443 (TCP) should be forwarded to your Jigsaw's
local IP. More about port forwarding can be found in bOS Server
manual.
3.2 Open bOS Configurator.
3.3 Click on the menu button on the top right corner and select Add.
3.4 Enter your Access ID, User name and Password
KNX IP /
KNX USB
By default, Access ID is the serial number of your Sledgehammer.
You can find the serial number on the sticker on the bottom of your
Sledgehammer (e.g. S1234). Access ID is a unique name for
accessing the bOS Server. This name enables adding profile and
accessing your bOS Server, without the need of knowing it's IP
address.
on your PC. You can get
Enter Username: User and Password: Pass and click OK.
4. Start creating your bOS configuration or open an existing
configuration.
Please check our support tools for more information on how to work
with bOS: www.comfortclick.com/Support
5. Windows Login
Your Sledgehammer is running Windows 10 IoT. In order to login to
Windows use the following credentials: Username: ComfortClick,
Password: Pass
The procedure below is optional; it is required only if you want
to change your default Access ID and other access settings.
Edit Sledgehammer Access Settings
a) Connect locally - make sure that your PC with bOS
Configurator is connected to the same network as your Jigsaw
than follow the steps below.
e.g. "S1234"
ComfortClick
Demo
comfortclick12
https://89.212.218.766/
https://89.212.118.366/
3. Login to your account on ComfortClick web page
www.comfortclick.com
4. You can now change your Server name, Access ID, Public
Address and Local Address.
5. You can also see the list of all your other Controllers and edit their
settings under your account profile.
O ce