OnCourt OffCourt Mini-Net Instructions

1. Assemble the horizontal black poles and end bases first.
2. Assemble one side of extension poles (numbers 2 & 3) and slip the net sleeve over the
extension poles.
3. While holding the net sleeve up on the extension poles (as it should be loose), have
another person complete steps number 4 and 5 below.
4. With the other set of extension poles, assemble but DO NOT insert into the end base
yet. Hold the extension poles and slip the other net sleeve over them. The net should
feel loose, there should be no tension.
5. Insert the second set of extension poles with net sleeve on into the end base while tilting
the poles inward to keep pressure off of the net, (see photo below). The right side should
be fully inserted while the left side is tilted into the base.
6. Once both posts are in place, you can tighten the adjustable Velcro strap as needed and
adjust the height of the net as well.
Note: Have one person at each end hold each net pole. The net will be loose so just hold the
net sleeve in place.
Note: The easy way to repeatedly assemble and disassemble the Mini-Net is to leave the net
over the end posts and simply roll the net up into the carry case.
Note: The 10ft wide net is approximately 32 inches high with single posts in use, and 64 inches
high with double posts in use. The Mini-Net adapts easily to all racquet sports, such as Tennis
and Badminton as well as lead-up volleyball games using foam balls or beach balls.
Copyright 2016 OnCourt OffCourt, Ltd. All Rights Reserved.
U.S. Patent No. 9545551
™
Mini-Net Instructions
www.OnCourtOffCourt.com