Summary of Contents for Auxano Technologies SOLA-CURE
- Page 1 SOLA-CURE MARINE BLIND INSTALLATION INSTRUCTIONS SPRING MECHANISM INSTALLATION INSTRUCTIONS QA47.03 installation manual sola-cure 2020 rev c. Auxano Technologies Ltd, www.sola-cure.com...
- Page 2 Mounting bracket 10-W-0172 Blind material Spring mechanism Bottom rail inner bar 10-W-0174 Cassette end cap (left) 10-W-0162 Bottom rail 10-W-0173 Cassette end cap (right) 10-W-0163 Bottom rail end caps 10-W-0175 QA47.03 installation manual sola-cure 2020 rev c. Auxano Technologies Ltd, www.sola-cure.com...
- Page 3 TOP MOUNTING BLOCKS 1. Face fix: Sola-Cure blinds are supplied with two L shaped brackets. The brackets are for use when face fixing only. 2. Top fix: If fixing to the ceiling or horizontal surface above or below the window, the L brackets are not required. The mounting block can be fitted directly to the horizontal surface.
- Page 4 16. Excess cable can be cut away using snips or other suitable tool. 17. Repeat the above for the second wire guide. QA47.03 installation manual sola-cure 2020 rev c. Auxano Technologies Ltd, www.sola-cure.com...
-
Page 5: Side Rails
21. Side rails are available for rectangular or square shaped blinds only. 22. Sola-Cure does not pre-drill holes for fixing. Holes can be drilled in the rear face (face fix rails) or in the left/right face. We recommend at least 2 holes per metre and use countersunk screws. -
Page 6: Operation Method
OPERATION METHOD There are 2 options available for operating a spring mechanism Sola-Cure blind A. Pulley cord operation B. Handle PULLEY CORD 23. The pulley cord runs over two binding screws in the bottom rail of the blind. 24. One... - Page 7 RETRACTION SPEED ADJUSTMENT 31. Sola-Cure blinds are unique in that they incorporate a feature that allows the user to adjust the speed at which the blind retracts. On one end of the cassette, there is an adjustment screw (flat head screwdriver slot).
-
Page 8: Operation
OPERATION 35. Sola-Cure window blinds are available as a self locking (SL) or constant tension (CT) option. However this does not affect how the blind is operated. d. Self-locking (SL). The blind can be stopped at various points of retraction and will maintain that position without using the pulley clamp. -
Page 9: Appendix A : Loose Items
APPENDIX A : LOOSE ITEMS QA47.03 installation manual sola-cure 2020 rev c. Auxano Technologies Ltd, www.sola-cure.com...
Need help?
Do you have a question about the SOLA-CURE and is the answer not in the manual?
Questions and answers