Summary of Contents for Gens Ace TATTU Plus 2.0
- Page 1 TATTU Battery User Manual Thank you for choosing Tattu product, please always follow the instructions before use.
-
Page 3: Table Of Contents
Catalog Packing List Product Specifications Product Operations Guide 1. Overview 2. Indicator LED Locations 3. Operation Guide Attention After-sale Warranty 2017 TATTU PLUS... -
Page 4: Packing List
Thank you for choosing TATTU Plus 2.0 as your UAV battery! Please read all instructions carefully before using your Tattu Plus 2.0 LiPo battery. Keep this manual for future reference. Please ensure your TATTU plus 2.0 is in good operating condition before use. -
Page 5: Product Specifications
Product Specifications Rechargeable lithium Battery Type polymer battery pack TATTU PLUS 2.0 18000mAh 15C Model 22.2V Smart Battery Capacity 18000mAh 399.6Wh Watt-hour Rating Cell Configuration 6S1P Voltage 22.2V Charging 10-40℃(50℉-104℉) Temperature Discharging 5-40℃(41℉-104℉) Temperature Net Weight(±20g) 2270g Dimensions 205.5*94.2*79.5mm (Length*Width*Height) Maximum 25.2V... -
Page 6: Product Operations Guide
Product Operations Guide 1. Overview Storage Indicator Low-voltage Indicator Warning Indicator Power Button Charge Level Indicator Top View Handle Balance Port & SMBus Communication Port Charging Port Output Wire (negative / black) Output Wire (positive / red) Side View 2017 TATTU PLUS... -
Page 7: Indicator Led Locations
2. Indicator LED Locations LED7(White) LED6(Orange) LED5(Red) Power Button LED1(Green) LED2(Green) LED3(Green) LED4(Green) ① The four green LEDs 1, 2, 3 and 4 will show you the charge level and service life of the battery. ② LED5, LED6 and LED7 are warning indicators. LED7 LED6 LED5... -
Page 8: Operation Guide
3. Operation Guide ① View Power Level When the battery is OFF, short press the button once to · check the remaining charge level, the LEDs will shut off after 3 seconds. When charging the battery, the LEDs will keep flashing ·... - Page 9 ④ Charging Short press the button for 1 second, then long press for 3 · seconds to activate the charging port. When charging, the LEDs will flash, showing the charging · status. When all LEDs turn OFF during charging, your battery is ·...
-
Page 10: Attention
Above Normal Temperature Storage 60-70℃ (158°F – · 176°F): If the charge level is higher than the best storage level and the temperature is between 60℃ and 70℃, the battery will start self-discharging to a reasonable storage level within 2 days. Self-discharge will stop at a predetermined voltage. -
Page 11: After-Sale Warranty
This product is underwritten by: Allianz China General Insurance Company Ltd. 1. Scope of Application This specification applies to Gens Ace and TATTU lithium polymer battery after-sales service. 2. Battery Usage, Storage Please refer to the safety usage and battery storage instructions. - Page 12 ③ Battery used within 6 months: if there is an issue with electrical performance not caused by physical damage or modification and after being tested, we will repair it without charge. If we are unable to repair the battery we will replace it with a new one and share half of the shipping fee.
- Page 13 SHENZHEN GREPOW BATTERY CO. LTD RESERVES THE RIGHT TO FINAL INTERPRETATION. Company Name： Grepow Inc Address: 6681 Sierra Ln. Suite F Dublin, CA 94568 Website: www.genstattu.com Tel: +1-925-364-7166 Fax: +1-925-364-7177 Email: info@genstattu.com 2017 TATTU PLUS...
- Page 14 The content of this manual is subject to change without notice. If you have any questions about the manual, please contact info@gensace.com TATTU. All Rights Reserved.
Need help?
Do you have a question about the TATTU Plus 2.0 and is the answer not in the manual?
Questions and answers