Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Universe Thermostat
- Page 1 THERMOSTAT USER GUIDE www.universe-thermostat.com info@universe-thermostat.com...
- Page 2 Welcome to your new home and Universe Thermostat. Please refer to this user guide to help set up your thermostat. www.universe-thermostat.com info@universe-thermostat.com...
-
Page 3: Table Of Contents
Table of Contents Installation Manual Wi-Fi Registration and Setup What you’ll need Register your Wi-Fi enabled HVAC System Log out and Disconnect Thermostat Legend System Setup and Settings Time and Date Setup Temperature Display Setup Schedule Setup Vacation Setup Ending Vacation Hold... -
Page 4: Installation Manual
What you’ll need (we suggest writing these down) Your unique Wi-Fi enabled thermostat SSID: (This information is available in the original thermostat packaging. It can also be found in Wi-Fi settings) Click on the gear icon to go to the settings page. -
Page 5: Register Your Wi-Fi Enabled Hvac System
Register your Wi-Fi Enabled System Check that your HVAC system is on with power to both the unit and Universe thermostat. Lift up the front access panel Make sure the main power switch is in the up and/or on position Ensure your wireless router is on and is connected to the internet. -
Page 6: Log Out And Disconnect
To logout in the web and mobile app, simply select logout from the menu bar (web app) or on the settings page (mobile app). To disconnect the thermostat from either the web or mobile app, visit the settings page on the app and select deregister device. -
Page 7: Thermostat Legend
Thermostat Legend This is a touchscreen thermostat. All selections can be made by simply tapping the screen. Wi-Fi connection indication Current room humidity (if applicable) Set temperature Current room temperature System operating mode Temperature mode Fan speed Settings Temperature adjusment up and down Time www.universe-thermostat.com... - Page 8 Medium fan speed High fan speed Automatic fan speed adjusts the fan speed based on the difference between the room temperature and set temperature. The further away the room temperature is from the set temperature, the faster the fan speed. www.universe-thermostat.com info@universe-thermostat.com...
-
Page 9: System Setup And Settings
Using the up and down arrows input the current time. Press save in the top right corner. Note: If your thermostat is already connected to Wi-Fi, you will be prompted to adjust these settings in your Universe App. www.universe-thermostat.com info@universe-thermostat.com... -
Page 10: Temperature Display Setup
(time & temperature). You can set up 4 programs per day for each day of the week. For the thermostat to follow these programs, you must have the thermostat in schedule mode (see more about scheduled mode on page 14). -
Page 11: Vacation Setup
Vacation Setup You can set a vacation hold on your thermostat if you are going to be away for an extended length of time. This feature is used to save energy while residents are away. If in heating season, you can allow the suite to get cooler than if you were home. If in cooling season, you can allow the suite to get warmer than if you were home. -
Page 12: Setting System Operating Mode
Setting System Operating Mode You can set the Universe thermostat to five different operation modes to dictate when the HVAC system will engage. Permanent Hold – holds all comfort settings (temperature mode, set temperature and fan speed) 24/7 for consistent continuous operation. -
Page 13: Permanent Hold
Select save in the top right. Heat mode puts the system into heating to produce hot air Cool mode puts the system into cooling to produce cold air Auto mode puts the system into heating or cooling automatically depending on the set temperatures www.universe-thermostat.com info@universe-thermostat.com... -
Page 14: Schedule
This will change the temperature to the setback temperature set by the initial installer. You can update the temperature using the up and down arrows on the right. However, the next time setback is engaged it will revert to the setback temperature set by the initial installer. www.universe-thermostat.com info@universe-thermostat.com... -
Page 15: Vacation Hold
Ending Vacation Hold When your vacation is over and you’re ready to resume normal operation, you must end your vacation hold. To do so: Select Vacation Setup. Select Stop Vacation on the right. Press Home in the top right corner. www.universe-thermostat.com info@universe-thermostat.com... -
Page 16: Setting Fan Speeds
Using up and down arrows, select your desired humidity level. Note – There is a 5% humidity dead band. The room humidity will have to be +/- 5% beyond the set humidity before the humidifier will engage. www.universe-thermostat.com info@universe-thermostat.com... -
Page 17: Safety Sensors And Warnings
Freeze protection sensor – Alerts the HVAC unit and unit owner when air entering the unit drops below 4°C/39°F. An alert appears on the thermostat and throughout the Universe app. It also forces the unit to run hot water through the coil to prevent the hydronic coil from freezing. -
Page 18: Wi-Fi Reset
System Reset There are two system reset options. Residents can reset their Wi-Fi or perform a factory reset. A factory reset should only be performed by a qualified technician with the Universe installer codes. Wi-Fi Reset SYSTEM RESET BACK If you reset your Wi-Fi settings on your... -
Page 19: Contact
Contact You can contact Unilux for any questions or concerns regarding the thermostat. Our Parts & Service Department can be reached at: 905.265.2418 800.397.3680 service@uniluxvfc.com Our contact information can also be found on the thermostat: Select the gear icon to go to the settings page. - Page 20 Parts & Service 905.265.2418 800.397.3680 Service@uniluxvfc.com www.universe-thermostat.com Office: 905.851.3981 | info@universe-thermostat.com 7930 Huntington Rd, Unit A, Woodbridge, ON L4H 4M8 www.universe-thermostat.com info@universe-thermostat.com...
Need help?
Do you have a question about the Thermostat and is the answer not in the manual?
Questions and answers
I have set the fan mode to 0 and it is still blowing air why?