Please check if your TIPES is complete while you are unpacking the cardboard box. Make sure that no items are left inside the box. You should keep the TIPES cardboard box for future transportation or storage purposes. Table of contents 1.
Page 3
5. DESCRIPTION OF MC1100 CONNECTORS ............12 Basketing unit / Reading unit Connector (AUX) ..................... 12 UniversalSerialTipesBus Connecter (USTB) ....................12 6. HOW TO USE TIPES MC1100 MASTER? ............12 Programming fanciers data from PC ........................ 15 Deleting fancier ..............................15 7.
Do not place the MC1100 clock close to sources of heat such as radiators etc. The MC 1100 clock and other TIPES units except traps should only be used inside a building. Do not use these units immediately after moving them from a cold to a warm location. Before powering, on allow at least 60 minutes to acclimatize.
3. TIPES MC1100 system configurations at your loft MC1100 allows you a variety of configurations. It is fully compatible to the former TIPES versions (Control unit, reading unit). For more details please contact your TIPES dealer. Connecting MC1100 to TIPES older TIPES equipment...
Connection schematic The MC1100 is able to substitute the control unit completely. It supports every kind of reading unit (normal or continuously clocking) without any hard- or software changes to your system. Connecting MC1100 within USTB environment Antenna 2 Antenna 3 Antenna 1 End of line connector Powerplug...
UniversalSerialTipesBus Connecter On the USTB (Universal Serial TIPES Bus) you can connect several types of traps (1-, 2- or 4-field traps, continuously clocking device). Also additional hardware, which will be developed in the future will be connected to the Multifunction port. The USTB is designed to connect one unit to the other.
Page 14
TIPES system. You should have a look at it every time you start your system. You could also reach this window again from the main menu, when you press the CANCEL (‘C’)key.
This chapter describes how you get your pigeons registered with the basketing unit. During the basketing procedure the internal clock of your MC 1100 is automatically adjusted by the basketing unit. The time signal is sent from the satellites of the global positioning system (GPS) which works in every area of the world.
Page 16
satellites. The GPS requires signals from 4 satellites. Move the time receiver antenna if the number of detected satellites does not reach this value. Satellite search takes a few minutes. Best performance is guaranteed in open air. Concrete walls and buildings diminish the radio signal strength. This time adjustment will start automatically if the internal clock of the master unit has not been adjusted within the last 24 hours.
Page 17
Liberation point Number and max number ob basketed pigeons on this race New York 06. 18:06:21 Date/Time 3/3: Pigeon number of basketed pigeon AU02-YORK230001BLUEc 07/06/02 18:06:21 Basketing time of the pigeon Please put your pigeons one after the other on the basketing unit and listen to the beep that indicates successful basketing.
DEFECTIVE RING Allocation during basketing procedure As you know from some older TIPES control unit versions you are able to allocate a pigeon during basketing without a pc connected. Every version of the MC1100 clock has implemented that function as a standard. This function should be used in case of emergency when a pigeon ring get defective.
Allocate Only available in CLUB mode. The MC1100 clock needs to know the electronic number of each TIPES ring that is attached to your pigeons. The MC1100 clock can store a cross reference table with all your pigeons association ...
PC-Communication Only available in CLUB mode. Your TIPES is able to exchange data with an Windows PC. Data transfer is required to − Store and restore an allocation table into the MC1100 clock − Store fanciers identification data into the MC1100 clock −...
Available in CLUB mode and in HOME via reading unit Club mode operation TIPES can generate printouts of basketed pigeons after basketing or of registered pigeons after a training flight or a race. You can print via the basketing unit on a serial printer. For official races you have to use the basketing unit to generate the closing knockoff.
• Allocation List If you print the Basketing or Knockoff List you have to select the liberation point of the race you want print out firstly. Basketing List (Race entry form): TIPES MC1100 V2.51INT Page 1 Race entry form Date: 11/03/11 Time: 09:37:14 Breeder No.: 293 01 01 001...
Prior to the basketing of your pigeons you can store picked birds and nominations for each pigeon into your TIPES MC1100 clock. Gambling could be done everytime independent to which unit the MC1100 clock is connected (Reading unit, basketing unit, power supply) and which mode is set.
Nominations Before you could nominate the pigeons you have select for which race they should be nominated. To select a pigeon from the pigeon list you can Nominations 06. 18:06:21 use the scroll or the search function. For details ------------------------------------------- please refer to chapter “Allocation during AU02-YORK230001BLUEc basketing”.
To select a pigeon from the pigeon list you can Picked birds 06. 18:06:21 use the scroll or the search function. For details ------------------------------------------- please refer to chapter “Allocation during AU02-YORK230001BLUEc basketing”. AU01-YORK241234GREYh Press the ENTER key to select the pigeon. AU00-YORK230012BLUEc Pigeons which are not allocated or already AU02-YORK230312BLUEh...
Basketed pigeons are disabled from deleting. After you print out the race result list the MC1100 clock will release the pigeons for deleting. No warning will be display if you delete a race. Deleting will be execute immediately and irreversible as far as you confirm the secret code. Setup Available in CLUB, HOME or SINGLE mode.
Set Printer Lines per page Please enter the number of lines per page you Printer 06. 18:06:21 want to print. Press enter to set up. ------------------------------------------- Lines per page Setup Race Move the selection bar the race you want to Registration print and press the ENTER key.
Selftest Available in CLUB, HOME or SINGLE mode. Not ready yet. Time /Date Available in HOME or SINGLE mode. The time and date can be set here. If race or basketing data is available, this function is disabled. Input date and time and press the ENTER key SINGLE 06.
9. Software Update Please contact your dealer. 10. Direct access functions The following list give you an overview of the short cut function for direct access to the MC1100 master functions. To activate the short cut function please press key on MC1100 master, which is listed below.
Page 31
Gambling Nomination Picked birds Delete Setup Set Time Set Printer Lines per page 5 2 1 Setup Race Reg. with EL-No. 5 3 1 Reg. without EL-No. 5 3 2 Contrast Set Pin-Code Show License 5 5 1 Print License 5 5 2 Update License 5 5 3...
MC1100 is a very reliable system and high quality electronic clocking system for racing pigeon sports. Nevertheless it is possible that the MC1100 clock doesn't work as you would expect. With the help from Dr. MC TIPES, you are capable to solve most questions and problems by yourself in a short time.
2. The guarantee covers all parts or components which fail due to faulty workmanship or faulty material. The guarantee does not cover TIPES components where defects or poor performance are due to misuse, faults in the building wire, accidental damage, neglect, faulty installation, unauthorized modification or attempted repair or failure to use the unit in accordance with the operating instructions.
Need help?
Do you have a question about the MC 1100 and is the answer not in the manual?
Questions and answers