Summary of Contents for UDT Instruments 301DIV
- Page 1 (217) 352-9330 | Click HERE Find the UDT Instruments 301-DIV at our website:...
- Page 2 Model 301DIV SIGNAL CONDITIONING AMPLIFIER Revision B July 20, 2005 UDT Instruments 8581 Aero Drive San Diego, CA 92123 Phone (858) 279-8035 Fax (858) 576-9286...
- Page 3 UDT Instruments • 8581 Aero Drive • San Diego, CA 92123 Phone (858) 279-8035 Fax (858) 576-9286 Dear Valued Customer: The conventional fuse in your Model 301-DIV has been replaced with a self-resetting fuse. This new “fuse” is actually a PTC (positive thermal coefficient) device, which significantly increases resistance when current in the 301-DIV reaches an unsafe level.
- Page 4 UDT Instruments • 8581 Aero Drive • San Diego, CA 92123 Phone (858) 279-8035 Fax (858) 576-9286 MODEL 301DIV SIGNAL CONDITIONING AMPLIFIER The Model 301DIV amplifier module is a member of UDT’s growing family of conditioning amplifiers. It interfaces position-...
- Page 5 UDT Instruments • 8581 Aero Drive • San Diego, CA 92123 Phone (858) 279-8035 Fax (858) 576-9286 301DIV OPERATING INSTRUCTIONS 1. Connect detector(s) in be desirable when using the PIN-LSC/4, PIN-LSC/9. accordance with detector 301DIV-30kHz. Since the Connect detector pins labeled (-) connection instructions.
- Page 6 UDT Instruments • 8581 Aero Drive • San Diego, CA 92123 Phone (858) 279-8035 Fax (858) 576-9286 Figure 1 Input Connector Orientation Figure 2 Figure 3 Detector Orientation...
-
Page 7: Specifications
UDT Instruments • 8581 Aero Drive • San Diego, CA 92123 Phone (858) 279-8035 Fax (858) 576-9286 All dimensions in inches SPECIFICATIONS GAIN at sum output Input Current Range (V/A) Frequency Bandwidth 1 mA to 3 mA Standard DC to 5 kHz 300 µA to 1 mA... - Page 8 UDT Instruments • 8581 Aero Drive • San Diego, CA 92123 Phone (858) 279-8035 Fax (858) 576-9286 UDT POSITION-SENSING DETECTOR/CABLE ASSEMBLIES MODEL NBR DESCRIPTION 1232 PIN-SC/25D Detector/Cable Assembly 1233 PIN-SC/10D Detector/Cable Assembly 1237 PIN-SC/50 Detector/Cable Assembly 1238 PIN-LSC/5D Detector/Cable Assembly with 35-mm lens adaptor...
- Page 9 The instrument and related accessories are “CE” compliant when operated in the manufacturer’s recommended configuration, and in accordance with the exclusions described in this addendum. UDT Instruments does not accept responsibility for “CE” compliance if the instrument is used in a non recommended configuration.
-
Page 10: Product Warranty
UDT Instruments • 8581 Aero Drive • San Diego, CA 92123 Phone (858) 279-8035 Fax (858) 576-9286 Product Warranty Warranty Provisions Warranty Return Procedures UDT Instruments warrants the items delivered Note: If this device has warranty and hereunder to be free from defects in material and workmanship,... -
Page 11: Warranty
Otherwise, all orders will be shipped UPS Ground Pre-Paid and this fee will be added to the invoice unless specified otherwise in the shipping carrier box above. *RMA Numbers (upon issue from UDT Instruments) are valid for 60 calendar days! Last updated October 2007...