Norvado Potenza ST Manual

SEARCHING FOR YOUR CODE
If your home entertainment device does not respond
to the Potenza ST Universal Remote Control after
trying all of the codes listed for your brand, or if your
brand is not listed at all, try searching for your code.
For example, to search for a code for your TV:
1. Turn on your TV.
2. On the remote control, press TV once;
it will blink once. Then press and hold
SETUP until the TV key blinks twice.
3. Type 9 9 1. The TV key will blink twice
4. Aim the remote control at the TV and
press POWER once.
5. Press and release the CH+ key
continuously, then stop when the TV
turns off.
NOTE: In the search mode, the remote control
will send IR codes from its library to the selected
device, starting with the most popular code first.
6. Press POWER. The TV should turn on,
then press SETUP once to lock in the
code. The LED will blink twice to indicate
that the code is saved.
NOTE: If the TV does not turn on during
step 6, then slowly press and release
CH- to go back through the codes, then
press SETUP when the TV turns on.
7. To search for the codes of your other devices,
repeat steps 1 through 6, but substitute the
appropriate key (e.g., VCR, DVD, AUD, or STB)
for the device you are searching for.
PARENTAL CONTROLS
There are several ways to use Parental Controls.
From the Main Menu, select My Settings. Arrow to
the right, highlight Parental and press the OK button.
You will then be in the Parental Controls menu to:
Change PIN:
Select the Change PIN category to enter your new PIN
and confirm it. Until you change it, the default PIN is
0000.
Edit Locked Channels:
You can lock entire channels via the Edit Locked
category so that it requires a PIN to view
programming. You may prevent locked channels from
showing in the channel guide via the Parental Control
Options (locked channels would still be accessible
using the number keys and entering a PIN).
Set Program Rating Limits:
To control the types of programming that can be
viewed, you may set program limits based on motion-
picture ratings (G, PG, R, etc.) or TV ratings (TV-
G,TV-14, etc.) using the Set Ratings category. If you
attempt to tune to a channel that is airing a program
with a rating at or above your rating limit, you must
enter a PIN to view the program.
Set Time Restrictions:
The Time Restrictions category allows you to set time
periods per day where television access requires a
PIN. These time restrictions may be set by selecting
the Green button to Add Restriction under the Time
Restrictions category.
Cancel Override:
Cancel Override category allows any previous PIN
overrides for an extended period of time to be
cancelled. Once the override has been cancelled, the
parental PIN will need to be used for all Locked and
Rated channels.
REMINDERS
Set Reminders: While viewing the guide, highlight
the program where you want a reminder and press
OK.
Norvado Locations
Cable, WI Location
43705 US Hwy 63
Cable, WI 54821-4616
(715) 798-3303
Hayward, WI Location
15818 Railroad Street
Hayward, WI 54843-7110
(715) 934-3303
Ashland, WI Location
1310 Lake Shore Drive East
Ashland, WI 54806-2162
(715) 682-0290
TM
www.norvado.com
Computer Support: (715) 798-7184
Mailing Address: P.O. Box 67 | Cable, WI 54821
V316
REMOTE CONTROL
GUIDE