Do not install the unit using defective hanging, attaching, or mounting hardware. Install the unit considering the potential for earthquakes. Dispose the packing materials safely. • BSE, Inc., 2246 Palmer Drive, Suite 108, Schaumburg, IL 60173 T: 866-360-5675 email:@bsesales.com web: www.bsesales.com...
Page 4
Do not open the inlet grille of the unit during operation. Removing or servicing the unit. BSE, Inc., 2246 Palmer Drive, Suite 108, Schaumburg, IL 60173 T: 866-360-5675 email: @bsesales.com web: www.bsesales.com...
• 4 Heavy duty screws for the type of wall and ceiling material Tools To Consider for Installation (field provided) • Level • Screwdrivers • Drill • Stud detector • Drill Bits • Pencil BSE, Inc., 2246 Palmer Drive, Suite 108, Schaumburg, IL 60173 T: 866-360-5675 email: @bsesales.com web: www.bsesales.com...
Page 6
Crystal Clean Air BA-1000 External Dimensions (inches) Figure 5: Dimensions Crystal Clean Air BA-1000 External Dimensions (inches) Figure 6: Dimensions Crystal Clean Air BA-350 External Dimensions (inches) BSE, Inc., 2246 Palmer Drive, Suite 108, Schaumburg, IL 60173 T: 866-360-5675 email: bse@bsesales.com web: www.bsesales.com...
Page 7
• There must be placed slightly below any ceiling fans. • The base of the unit must be at least 7.0 feet from the floor for adequate disbursement. BSE, Inc., 2246 Palmer Drive, Suite 108, Schaumburg, IL 60173 T: 866-360-5675 email: @bsesales.com web: www.bsesales.com...
Ionization Placement & Clearance BSE units should not be located near to air exhausting inlets of other HVAC equipment. Supply air outlets can be configured to aid the ionized air disbursement in a uniform manner. Ionizer should be oriented such that the outlet is slightly below any ceiling fans. Exhaust fan inlets or other return air points creating a negative pressure should not be within 4.5 times the width of the ionization...
Page 9
DO NOT lift by the slots. If damage is found, repack the unit as it was received in the original container. 8. If the unit is undamaged, remove and retain the installation manual. BSE, Inc., 2246 Palmer Drive, Suite 108, Schaumburg, IL 60173 T: 866-360-5675 email: sales@bsesales.com web: www.bsesales.com...
Page 10
6. If the unit is loose, repeat the steps above and adjust the screws, as necessary. If the unit is secure, the installation is complete. 7. Plug in the cord into a power outlet and enjoy cleaner air! BSE, Inc., 2246 Palmer Drive, Suite 108, Schaumburg, IL 60173 T: 866-360-5675 email: sales@bsesales.com web: www.bsesales.com...
Page 11
6. If the unit is loose, repeat the steps above and adjust the screws as necessary. If the unit is secure, the installation is complete. 7. Plug in the cord into a power outlet and enjoy cleaner air! BSE, Inc., 2246 Palmer Drive, Suite 108, Schaumburg, IL 60173 T: 866-360-5675 email: sales@bsesales.com web: www.bsesales.com...
Virtually maintenance free – suggested maintenance includes spraying ionizer tips with canned air 1x yearly. We strongly recommend running the unit for one-hour prior opening to the public. BSE, Inc., 2246 Palmer Drive, Suite 108, Schaumburg, IL 60173 T: 866-360-5675 email: sales@bsesales.com web: www.bsesales.com...