Table of Contents
Advertisement
Quick Links
SIGg Micro-Telemetry Unit
User & Installation Guide
1
0
2
3
Power
Com
Data
Test
SIGg
B
L
A
N
Document
V1.05 150708
Product Conformity
R&TTE 09/2012
CAT II
Supplier Address
Smart Innovations Grid Ltd
Pebble Close Business Village,
7 Pebble Close,
Amington,
Tamworth,
B77 4RD
Tel: +44 (0) 8450 768 186
Fax: +44 (0) 8450 768 187
Important Information.
© Copyright 2012 - 2015 Smart Innovations Grid Ltd.
Smart innovation Grid makes no warranty of any kind with regards to the content contained within this document, including, but
not limited to, the implied warranties of the above mentioned product and fitness for a particular purpose. Smart Innovations
Grid Ltd shall not be liable for any technical or other errors or omissions contained within, nor for incidental or consequential
damages or losses incurred in connection with the furnishing, performance, or use of this material.
This document contains proprietary information, which is protected by copyright. No part of this document may be reproduced,
or translated without prior written consent of Smart Innovation Grid Ltd. The information is provided "as is", not without
warranty of any kind, and is subject to change without notice.
Smart Innovations Grid Ltd ~ Company Reg No. 07309284 © 2010 - 2015
SIGg
GPRS modem
Model No: SIG101-00
Input: 80 - 240V~ 50 / 60 Hz 0.15A
Made in England
Channel
0V 3
L
N
1 2
B
A
Channel
MODBUS
Advertisement
Table of Contents
Summary of Contents for Smart Innovations Grid SIGg
- Page 1 Smart Innovation Grid Ltd. The information is provided “as is”, not without warranty of any kind, and is subject to change without notice. Smart Innovations Grid Ltd ~ Company Reg No. 07309284 © 2010 - 2015...
- Page 2 Smart Innovations Grid Ltd, otherwise known as SIG, is a company whose product portfolio includes a product known as ‘SIGg’. SIGg is a GPRS based micro energy monitoring system which, when attached to a utility meter, can provide vital statistical information on energy consumed or generated.
- Page 3 The SIGg must be fitted in the text readable format with A, B, L & N facing downwards. Fitting in this orientation will stop any cable becoming loose and then re-inserting itself to power SIGg up or interconnect A,B into L,N or vice versa, this is a fail-safe-install state.
- Page 4 Additional 15 slaves (ID 33 - 48) reserved for future use. Over air configuration controlled by SIG server, firmware upgrade to enhance performance only applicable in field. Smart Innovations Grid Ltd ~ Company Reg No. 07309284 © 2010 - 2015...
Need help?
Do you have a question about the SIGg and is the answer not in the manual?
Questions and answers