Page 1
AUTOMATIC CAN SEALER ACS-1 INSTRUCTION MANUAL Thank you for purchasing this Can Sealer Please follow these instructions to get the best out of your new machine. Happy canning!
Page 2
Introduction The Brewly Automatic Can Sealer ACS-1 is made to be used with round plastic or aluminum cans with 202 CDL-type lids (although other types may work). It can be used by any business or industry that needs to package beverages or liquids in cans of different materials, shapes and sizes.
Standard, 440ml Standard or 330ml Sleek, it should be placed inside the 500ml adaptor (used as base) to fit that particular can size. Example: If you have a Brewly 330ml Sleek Can adaptor, place it inside the 500ml Standard can adaptor that is supplied with the can sealer.
Page 4
Lever over the Ridge, then the Turntable height needs adjustment, continue to point 3. 3. To adjust, first loosen the Turntable Nut by using the included Brewly Turntable Nut Tool (see image above). Hold the Lever in its position with one hand and insert the Tool into one of the holes in the Turntable Nut and pull counterclockwise.
Technical Information Brewly Automatic Can Sealer ACS-1 - Can Adaptor for 500ml Standard cans is included, other adaptor sizes such as 330ml Standard, 440ml Standard and 330ml Sleek can be bought separately if needed, note that they all use the 500ml adaptor as base to reach the correct height (might need adjustment in some cases).