American party place Popcorn Machine Instructions

Popcorn Machine

Before you Plug In the Machine:

 Make sure the wall outlet can take the three-pronged grounded
plug on the power supply cord. Make sure nothing else is
plugged into the outlet.
 An extension cord should NOT be used. Fires and malfunctions
can start from light duty extension cord that overheats due to
overload.
 The extension must have a grounded wire, properly connected,
or you can lose the safety features built into the machine.
 Never leave the "kettle heat" on when you are not popping.
Do Not:
 Use a two prong plug adapter
 Immerse kettle in water
 Cover the air vents on the popper. These are located at the top
of the machine. It can cause serious damage to the machine.
 Forget to return popcorn scoop!

Controls:

 Light and Warmer Switch—turns on the heat lamp and strip
heater under corn pan.
 Kettle Motor Switch—turns on the motor which drives kettle
agitator shaft.
 Kettle Heat Switch—turns on the heat elements inside the
kettle.