Page 1
Fresco Smart Fountain Ultra User Manual Model: FSW020 (Please read this manual carefully before using. Keep the manual in a safe place for future reference.)...
Petoneer account. Power on and ensure the Wi-Fi Indicator LED is blinking fast reflecting the device is ready for joining the Wi-Fi. Open the Petoneer App and click the '+' button and get walked through the SET-UP steps.
(1) The fountain doesn't support the 5GHz Wi-Fi, please make sure your Wi-Fi is 2.4G. (2) If the Wi-Fi indicator is not blinking fast after power-on, please long press and hold the manual feed button until the indicator blinks quickly. LED Status Specification Model: FSW020 Size: 8.19*7.80*7.13 Inches Status Weight: 43.03 oz(1220 g) (208x198x181mm)
FCC NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance.
Operating Temperature: 14 °F to 131 °F, (-10 ºC to 55 ºC) (indoor only) SkyRC Technology Co., Ltd. declares that this Fresco(FSL010) / Fresco Pro(FSW010) / Fresco Ultra(FSW020), is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Directive (2014/53/EU).
Page 7
7. Do not use outdoors. 8. Do not let the cord hang over the edge of table or counter, or touch hot surfaces. 9. Do not place on or near a hot gas or electric burner, or in a heated oven. 10.
Within the period of warranty, if the product fails with no fault of user operations, it will be repaired at Petoneer's expense. The warranty will not cover product failure in examples below: 2). Failure to operate or maintain the product following the (QIG) Quick Installation Guide Instructions.