Material list for E1
Material list for E3
Please read the following instructions carefully before starting the assembly
1. Please follow the instructions as described below and make sure -for your own safety- that the
assembly parts are not sharp. This is to avoid any kind of injuries.
2. Please beg children from playing with the appliance to avoid any injuries.
3. Excessive amount of laundry may damage the appliance. Please be aware of the limit of 5 kg.
4. In order to avoid fire, please do not dry laundry in front of inflammable objects.
5. Please do not apply excessive pressure to the appliance because in the worst case it might break.
WARNING: The One Click clothes dryer is only intended for drying textiles washed in water. It
should not be used by persons (and especially children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instructions concerning the right use. Children should be always supervised in order to ensure that
they do not play with this clothes dryer.
Useful hints for a trouble-free assembly:
Please pay attention to the instruction as well while you are going through the following steps. The
pictures will help you to understand how the different parts of the appliance have to be put together.
It is also very helpful to have a look at the pictures and the product video which you may find
here. Here you may see every detail of the clothes dryer if you have any doubt while going through
the different steps of the assembly. Before you begin, you should check the list of included
materials in order to verify if all necessary parts are available.
Step 1: Putting together wings and the lockable elements
Please put the 6 lockable elements as shown in the instruction together
with the side foldable wings. The click signal will show you that the
Material list for E2
Material list for E4
Need help?
Do you have a question about the One Click and is the answer not in the manual?
Questions and answers