Summary of Contents for PrintIn3D DigiTech PrintInCuring
- Page 1 User Manual LED LIGHT CURING BOX Model Name: PrintInCuring ( 405 nm, 9:50 Min ) PrintIn3D DigiTech 7F-1, No.146, Wenxing Rd., Guishan Dist., Taoyuan City 33377, Taiwan Tel: +886-3-397-8506 S-19-01-1128-UP401 V1.0...
-
Page 2: Table Of Contents
Table of Contents 1. Introduction…………………………………………………..……………………….3 1.1 Introduction 1.2 Product Characteristic 1.3 Signs and Symbols 2. Safety First……………………………………………………………………………..4 2.1 Indications 2.2 Health and Safety Instructions 2.3 Working Environment 3. Product Description………………………………………………………….4, 5, 6 3.1 Product Specification 3.2 Unpacking and checking the contents 3.3 Assembly and initial start-up 3.4 Optional Accessories 4. -
Page 3: Introduction
Dear valued customer, thank you for selecting Phrozen Cure. It is a high quality technical product for lab professionals. The Curing Box is used for post curing of photosensitive cured resins. Equipped with state-of-the-art electronic components, the PrintInCuring can be used for post processing photosensitive resins for dental, jewellery and microfluidic applications. -
Page 4: Safety First
: This product corresponds with CE standards. 2. Safety First 2.1 Indications The LED lab curing unit must only be used to cure light-activated composite and resin. Uses other than the one foresaid purpose are contraindicated. The manufacturer does not assume any liability for damage resulting from misuse. -
Page 5: Unpacking And Checking The Contents
Transportation And Storage Conditions: AMBIENT TEMPERATURE: －10℃～+70℃ 10%～90% RELATIVE HUMIDITY: 500hPa～1060hPa AMBIENT PRESSURE: Wavelength: 405 +/- 15 nm 3.2 Unpacking and checking the content 1 Main curing box equipment 1 Power cord 1 Protective Goggle 1 User Manual 3.3 Assembly and initial start-up Note: Prior to first use, please remove the screw on the bottom. -
Page 6: Optional Accessories
Power switch Power socket 3.4 Optional Accessories Optional accessories of Extra eye protection goggles can be purchased from authorized PrintIn3D DigiTech dealers where you purchase this unit. 4. Operation Preparation: Turn on the power switch on the back. Put the light-cured object in the effective place/center of the tray. -
Page 7: Safety Switch
Safety switch 4.4 Safety switch The system will be automatically suspended to protect operator when opening the door during curing. In case the tray is not well closed to trigger the safety switch, the device cannot be operated. If you do not wear a goggle, do not press the safety switch when the system is suspended by opening door. -
Page 8: System Maintenance And Cleaning
6. Warranty 6.1 Malfunction PrintIn3D DigiTech hereby warrants that for a period of one year from the delivery date, this device shall be free from defects in material and workmanship. In case the machine is found malfunctioned under normal use, PrintIn3D DigiTech will offer service of free maintenance and parts for replacement. - Page 9 PrintIn3D DigiTech expressly disclaims the liability for warranty even within warranty period, if (1) Damages caused by natural disaster. (2) Operator's fault or wrong operation. (3) Application use other than curing light-cured material purpose. (4) A malfunction or damage caused by repair, adjustment, modification which is not carried out by authorized PrintIn3D DigiTech engineers/dealers.
Need help?
Do you have a question about the PrintInCuring and is the answer not in the manual?
Questions and answers