Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Marengo Fabricated Steel TankOptix FLEX
- Page 1 FLEX MANUAL & INSTALLATION GUIDE REV 1.2...
-
Page 2: Table Of Contents
Mounting Equipment ................6-7 Sensor ..................6 Panel & Display ................6 Antenna Placement ..............6 Weld Collar (OPTIONAL) ............7 Wiring ....................... 7-8 Powering System ............... 8 TankOptix Cloud ................... 8 Maintenance ....................9 Support ....................... 12 TANKOPTIX FLEX - REV 1.2... -
Page 3: Display Unit (Mfs20-D)
The level reading Displays the currently- indicates the tank’s selected tank/sensor. current total volume. Interface Reading An interface reading will only be displayed in the event that the system is enabled to measure an interface. TANKOPTIX FLEX - REV 1.2... -
Page 4: Understanding The Interface Reading
If mounting outdoors, or to exterior of truck, consider mounting in a toolbox. Never mount in an area with heavy moisture or tire spray. Ensure the display is mounted securely. DO NOT over torque fasteners! TANKOPTIX FLEX - REV 1.2... -
Page 5: Control Panel (Mfs200-D)
3. Once the cable and connector have been mated, tighten down the locking screw. 4. It is important to make sure the quick-connect cables are fully tightened to ensure a proper seal. Only hand tighten the connections. DO NOT USE A WRENCH. TANKOPTIX FLEX - REV 1.2... -
Page 6: Recommended Placement
If the probe has a re-enforcement collar the stem will not be visible. Carefully guide the probe into the re-enforcement collar to fasten it to the sensor’s stem. TANKOPTIX FLEX - REV 1.2... -
Page 7: Mounting Equipment
If the control panel is configured for TankOptix Cloud reporting; the system will include an antenna. Mount provided external antenna on most elevated location possible, point upright, attach strong magnetic base to a solid, flat metal object, and make sure antenna is unobstructed from metal objects. TANKOPTIX FLEX - REV 1.2... -
Page 8: Weld Collar (Optional)
Secure ALL wiring! Run cables with a drip loop, and whenever possible utilize any existing wiring harnesses or raceways. DO NOT kink or bend any cabling. Bundle any excess cabling with wire ties. Tighten all quick connects! TANKOPTIX FLEX - REV 1.2... -
Page 9: Powering System
Re-connect vehicle battery. Ensure the system powers and displays a reading. TankOptix Cloud Once your system has powered on, contact TankOptix support to verify your system is reporting properly. For field-activation and deactivation please contact TankOptix support. TANKOPTIX FLEX - REV 1.2... -
Page 10: Maintenance
Remove sensor & probe assembly from the tank. Clean any debris from probe. If any During cleaning of tank or every 6 months. damage or deformation of probe is noticed contact TankOptix support. TANKOPTIX FLEX - REV 1.2... -
Page 11: Support
SUPPORT Monday - Friday 8:30AM - 5:00PM EST 1-800-919-2652 support@mfsltd.com When calling please reference TankOptix Support. TankOptix™ Copyright © 2016 The TankOptix™ name, logos and related marks are trademarks of Marengo Fabricated Steel, LTD TANKOPTIX FLEX - REV 1.2...
Need help?
Do you have a question about the TankOptix FLEX and is the answer not in the manual?
Questions and answers