Download Print this page

Home Art International WS-3201 Instruction Manual

Splash proof wireless speaker

Home Art International Ltd

Splash Proof Wireless Speaker

Instruction Manual

Customer

Revision

: R1.0

Date

: 12

translated or reduced, in whole or part, in written form or to any electronic medium or

machine-readable form without prior permission of the manufacturer.

The manufacturer assumes no liability for errors or direct, indirect, special, incidental

or consequential damages in connection with the performance or use of this

equipment, manual or any related materials. The information in this document is

subject to change without notice.

Instruction Manual of WS-3201

Home Art International Ltd.

WS-3201

-Jun-2010

P.1 of 5

Table of Contents

Need help?

Do you have a question about the WS-3201 and is the answer not in the manual?

Page 1 Date : 12 -Jun-2010 Copyright © 2010 by Home Art International Ltd. All right reserved. This document may not be copied, photo-copied, reproduced, translated or reduced, in whole or part, in written form or to any electronic medium or machine-readable form without prior permission of the manufacturer.
Page 2 High sound quality speaker with 3W output Working distance up to 15m (50 feet) Hidden antenna for both transmitter and wireless speaker Optional extendable antenna can be installed at transmitter to improve signal reception (2) Part Description : Instruction Manual of WS-3201 P.2 of 5...
Page 3 (4) Technical Specification : Power : 4 x AA batteries for transmitter 4 x AA batteries for wireless speaker Working distance : 15m (50 feet) Operating Temperature : +10 to +40 degree C Instruction Manual of WS-3201 P.3 of 5...
Page 4 Dispose of batteries safely. Do not dispose of batteries in fire, batteries may explode or leak. The supply terminals must not be short circuited. Attention should be drawn to the environmental aspects of battery disposal. Instruction Manual of WS-3201 P.4 of 5...
Page 5 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Instruction Manual of WS-3201 P.5 of 5...