InfinitiKloud Gen 2 Charge User Manual

Standard USB
IMPORTANT SAFETY INFORMATION
Caution: Do not use device if there is obvious damage.
Warning: Choking hazard. This device is not a toy. Keep away from children.
Important Instructions Before Use
1.
Device should only be used for the intended purpose as outlined in the instructions.
2.
Do not expose device to moisture or extreme heat.
3.
Do not submerge device underwater. Do not expose to liquid, smoke, or steam.
4.
Put cap back on USB when not in use to avoid damage.
How To Use?
InfinitiKloud Charge is compatible with PC, Mac, Android and iOS devices. It can be used in
the below scenario:
iOS device
2 3
1
Android device
2
3
1
PC/MAC
2
1
USB Type A Port Micro SD Card Slot
Connecting to iOS Device
Required hardware/accessories (not included)
MicroSD Memory Card*
1
MFI approved Lightning Cable**
2
Power Adaptor***
3
* Class 10 or above read/write speed
** MFI approved cable equipped USB-A (M) end at USB
2.0 speed
***Power adapter equipped with USB-A (F) port
Connecting to Android Device
Required hardware/accessories (not included)
MicroSD Memory Card*
1
USB-C or Micro USB Cable**
2
Power Adaptor***
3
* Class 10 or above read/write speed
** Cable with USB-A (M) end at USB 2.0 speed
***Power adapter equipped with USB-A (F) port
Connecting to PC/Mac
Required hardware/accessories (not included)
MicroSD Memory Card*
1
Optional USB-C Dongle**
2
* Class 10 or above read/write speed
** Optional for USB-C only desktop/laptop USB-A (F) to
USB-C (M) at USB 2.0 speed
General Backup
To perform a backup, simply press the red "Start" button on the "General" tab. This may take a
couple of minutes, depending on the amount of and the size of your files.
The following file extensions can be backed up:
Photos/Images: jpeg, jpg, bmp, gif, png, ico, icns, svg, wmf
Music: mp3, ogg, wma, wav, flac
Videos: mp4, mpeg, mov, wmv, avi
Documents: txt, pages, doc, docx, rtf, odt, wpd, pdf, xls, xlsx, xlr, numbers, ppt, pptx,
pps, psd
Default backup extensions can be updated on the Custom screen. Once it's updated, default
extensions will be changed accordingly. The units are Megabytes and Gigabytes.
The menu will then display your file's statistics and how much space each file is taking up, as
well as the amount of free storage space remaining.
Custom Backup
File Types
If you wish to back up specific file types, select "File Types". There will be a list of file formats
from which you can select to back up.
There are boxes beside the file formats, either with or without a checkmark. The checkmark
indicates that the file format is selected to be backed up. If you wish not to back up that format,
ensure that it does not have a tick next to it. Click on the boxes to either check or uncheck
them.
Once selected, press the red "Start" button to begin backing up those files.
Backup Location
You can also specify the file locations from which you want to back up your files.
By selecting 'Backup only these folders', you can add specific paths to perform backups.
You can also combine custom backups of File Types and Backup Location.
30171-EN