Bullseye S.D. Locks B500 Series Change Instructions

Bullseye B500 Series Locks
Change Instructions
CHANGING THE GUARD SIDE
1. Insert guard key. Rotate CLOCKWISE until it
stops.
2. Insert renter key. Rotate CLOCKWISE until it
stops. Lock should be in unlock position now.
RENTER KEY
3. Loosen guard fence clamp screw (on back,
center of lock) with change tool. Turn no more
than 3 times COUNTER CLOCKWISE.
fence clamp screw
GUARD KEY
1-800-364-4899
4. Rotate guard key COUNTER CLOCKWISE and
remove.
5. Insert new guard key and rotate CLOCKWISE
until it stops.
6. Use change tool to tighten guard fence clamp
screw CLOCKWISE.
CAUTION: Make sure key does
not move from stop position
while tightening clamp screw.
7. Rotate renter key COUNTER CLOCKWISE and
remove.
8. Rotate guard key COUNTER CLOCKWISE and
remove. Lock is set.
bullseyesdlocks.com