Do you have a question about the X-Press and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Sure-Loc X-Press
Page 1
• Crossbows Booklet Contents: Pg 2 • Important jack information Pg 2 • X-PRESS Assembly Pg 2 • Using the X-PRESS Pg 3 • X-PRESS diagram Pg 4 • Important maintenance and care instructions Pg 4 • USL kits Pg 4 • Press stand assembly Pg 4 •...
Page 2
PRESS by lifting the main frame. Note: If the timing cable under the Parallel limb technology For the more recent parallel limb bows, the X-PRESS X-PRESS (not PRO model) jack does not always go low enough to follow the horizontal main tube has come loose instructions in Step 1A.
Page 3
Tip for the X-PRESS (not PRO): Place your thumbs at the base of each enough room to work on the cams.
Page 4
1/2" wrench, 5/32" punch, hammer) adjustment of the riser supports. Waxing To keep the X-PRESS working properly, extend the jack shaft wax the swing arms or limb support brackets. Wipe fully and wipe the inner tube down with a silicone base lubricant these parts with an oil-free cleaner.
Need help?
Do you have a question about the X-Press and is the answer not in the manual?
Questions and answers