Advertisement
Quick Links
Mounting and instructions
Open the
Pull out the locking/release pin
The ladder can hold
ladder and it's ready
an entire family at
for use
once
Maintenance/control:
We advise performing a yearly functional test of the ladder, as well as controlling the screws and attachment to the wall.
X1 Escape · Niels Juels gate 3, 3263 Larvik, Norway · Tlf.: 33 11 15 60 · Email: post@x1escape.com
www.foldoutladders.com - contact@foldoutladders.com
w w w. x1escape.com
Advertisement
Summary of Contents for FOLDOUT LADDERS 4,8 m
- Page 1 Mounting and instructions Open the Pull out the locking/release pin The ladder can hold ladder and it’s ready an entire family at for use once Maintenance/control: We advise performing a yearly functional test of the ladder, as well as controlling the screws and attachment to the wall. X1 Escape ·...
- Page 2 70 mm The standard lengths of the ladder are 2,1 m, 3,9 m and 4,8 m. Different lengths can be combined to fit different building measurements. Attachment measurements: Mounting: Attach the ladder by fastening The ladder should normally start compatible screws in the wall.
- Page 3 Mounting and instructions for use / Placement on wall Traditional window: Windows that tilt at the center: Bottom placement: Minimum 50 cm above Bottom and top : The same as ground level. for the traditional window, but make sure to have a good Top placement: distance from the window to The ladder should be placed...
- Page 4 Mounting and instructions for use Wall with protruding/indented elements: Mounting the ladder with a 10 cm to 40 cm distance from the wall: Use telescopic/adjustable brackets. The brackets come in these sizes: 10 cm - 15 cm, 15 cm – 23 cm or 24 cm –...