HuronTel WireD Quick Reference Manual

When an alarm signal is transmitted to our monitoring station,
the alarm attendant will contact your premises first. You must
remember to state your premise passcode as proof of your
identification.
How do I?

Disarm the System:

Arm the System:

Activate a Panic Alarm:

HuronTel Security Systems WireD
Quick Reference Guide
Enter your access code to disarm the system.
Press and hold AWAY
key for 2 seconds
Press and hold PANIC
key for 2 seconds to
generate PANIC ALARM
Below is a diagram of the Keypad Display
Symbols and an explanation of each symbol.
1. Memory-indicates there are alarms in memory.
2. Fire-
indicates that there are fire alarms in memory.
3. Bypass-
indicates that there are zones automatically
or manually bypassed.
4. Night-
indicates that the panel is armed in the Night
Mode.
5. Open-
this icon is used with clock digits 1 + 2 to
indicate violated zones (not alarm) on the system.
When zones are opened, the OPEN icon will turn on,
and 7 segment displays 1 and 2 will scroll through the
violated zones.
6. Program-
Indicates that the system is in Installer's
Programming, or the keypad is busy.
7. Chime-
This icon turns on when the Chime function
key is pressed to enable Door Chime on the system. It
will turn off when the chime function key is pressed
again to disable Door Chime.
8. Stay-
Indicates that the panel is armed in the Stay
mode. It will turn on at the beginning of the Exit Delay.
KEYPAD BUTTONS
Press * and 0 together
Press and hold FIRE
key for 2 seconds to
generate FIRE ALARM
to QUICK ARM
Press and hold AUX
key for 2 seconds to
generate AUXILIARY ALARM