Summary of Contents for Youtomatic FIBARO FGMS-001
- Page 1 Sold In India By Youtomatic Solutions INSTRUCTION MANUAL MOTION SENSOR FIBARO SYSTEM...
- Page 2 Sold In India By Youtomatic Solutions Technical support Should you need any assistance in connecting or configuring your Home Center, please use our guides and technical presentations which can be found on our website: http://www.fibaro.com/en/support...
-
Page 3: Functional Features
Sold In India By Youtomatic Solutions Functional features Temperature sensor Accelerometer Motion sensor Light sensor... - Page 4 Sold In India By Youtomatic Solutions Download FIBARO app for smartphone...
-
Page 5: Start The Device
Sold In India By Youtomatic Solutions Start the device STEP 1 Open the casing by turning it clockwise. STEP 2 Take off the casing. - Page 6 Sold In India By Youtomatic Solutions Start the device STEP 3 Remove the battery blocker “I’m ready”. STEP 4 Check if the battery is placed correctly. The device will blink red.
- Page 7 Sold In India By Youtomatic Solutions Your Motion Sensor is ready to be added to the Home Center. Motion Sensor must be in range of the Home Center because it requires a direct communication with the controller.
- Page 8 Sold In India By Youtomatic Solutions Start inclusion mode STEP 5 Start your FIBARO application. Go to Settings.
- Page 9 Sold In India By Youtomatic Solutions Start inclusion mode STEP 6 Press “add device”. STEP 7 Press “Next”.
- Page 10 Sold In India By Youtomatic Solutions Inclusion mode has been launched...
- Page 11 Sold In India By Youtomatic Solutions Add your device STEP 8 Quickly, triple click the button in order to add your device to the system.
- Page 12 Sold In India By Youtomatic Solutions Processing your configurations...
- Page 13 Sold In India By Youtomatic Solutions Wake up the device Sometimes waking up the device is not required so it will be omitted automatically. STEP 9 Quickly, triple click the button in order to wake up the device.
- Page 14 Sold In India By Youtomatic Solutions The device has been added STEP 10 Name the device and assign it to the room.
- Page 15 Sold In India By Youtomatic Solutions Network range test It is recommended to check if the device’s destination is in range of your Home Center. STEP 11 Hold the button for a few seconds until LED diode blinks violet. STEP 12 Release the button, and press it again.
- Page 16 Sold In India By Youtomatic Solutions Network range test – quality indicator No signal! The device Direct Routed Limited will not work correctly! communication communication communication STEP 13 Press the button in order to leave testing mode.
-
Page 17: Installation
Sold In India By Youtomatic Solutions Installation During the installation it is recommended to wake up the device. STEP 14 Close the casing. Dots on the casing will show that the device is closed correctly. - Page 18 Sold In India By Youtomatic Solutions Installation STEP 15 Install the sensor’s holder in desired location. STEP 16 Insert the Motion Sensor in its holder. Motion Sensor’s range.
- Page 19 Sold In India By Youtomatic Solutions Motion Sensor’s light signals Sabotage alarm LED will flash in alarm mode (red-blue-white colours). Motion Everytime the movement is detected, Motion Sensor will glow in different colour depending on the temperature and user’s configurations.
- Page 20 Sold In India By Youtomatic Solutions www.fibaro.com...