Page 1
LED Neon 815 RT 2835 139° IP67 3Years Features Sectional view Bending Diameter mm[inch] Single LED cuttable Light Surface High quality circuit for stable and reliable performance Color LED with color surface and white LED with color surface available Side bending and small size for easy modeling IP67 protection with high performance silicone Dimmable Application...
LED Neon 815 RT Specification Voltage Beam Efficacy Power Color Temperature/ Luminous Flux Light Color Model No. (lm/m) Angle (lm/W) (DC V) (W/m) Wavelength(K/nm) LED Neon10- 2900-25000 815 RT 620-625 Color LED 11.52 139° 520-525 with color surface 465-470 White LED 590-595 139°...
Page 3
LED Neon 815 RT Luminous Intensity Distribution Diagram Unit:cd C0/180,165.8° AVERAGE BEAM ANGLE(50%):139.3° C90/270,112.9° Average Illumination Flux Out: 8.480lm Diameter Height Eavg,Emax Beam Angle:112.23° Note: The above data are tested at wavelength 620-625nm of the LED, and surface color is red. Please ask the sales for data of other specifications or color temperatures.
LED Neon 815 RT Product accessories End cap with hole (FREE) End cap without hole (FREE) Installation track (FREE) Quantity(5m):3pcs Quantity(5m):3pcs Quantity(5m):10pcs Screw(FREE) Silicone glue(FREE) Quantity(5m):10pcs Quantity(5m):1pcs Note: more accessories can be provided according to customer requirements Packaging Information Label the reel; Put reel, accessory bag and Seal and label the static Put the packed static shielding...
LED Neon 815 RT Installation 1.Tools Cutter Electric batch Brush 2.Installation steps Details of installation operation at input end Weld the wire to the PCB First put waterproof glue Wipe off the excess glue and board. inside of the plug, then push wait for the glue to solidify.
Page 6
LED Neon 815 RT 3. Operation details of installation card Screw the aluminum track to Then slowly press the tape The tape light is flatly and the installation position. light into the aluminum track. firmly stuck on the aluminum track. Note: At welding part, note the positive and negative poles of lines and board and the corresponding colors on the board;...
LED Neon 815 RT Do not bend many times,for it Do not use on wringing(twist) Do not bend at right angles Do not throw or pull when can endanger electronic lines. taking products Note: Cutting marks are on the PCB and can be seen in the bottom of the product. The above diagram only shows the correct or wrong way of operation.
Page 8
LED Neon 815 RT Common Faults and Troubleshoot Warning Quick Guide Problems Reasons Solutions Do not disassemble or retrofit the light. Do not touch the surface of the No electric supply. Fix the short circuit problem. light with a sharp object. Automatic power protection Do not do live-line working during installation,especially for high voltage from the open or short...