Watco WatcoFlex Innovator 900 Series Instructions

Instructions for installing the WatcoFlex
IMPORTANT: WatcoFlex
Before installing
Step 1: Secure the drain tee (Item 7a)
by screwing in the strainer body (Item 5) through the tub drain hole from
inside the tub.
DO NOT USE OIL-BASED PUTTY PRODUCTS: Watco
does not recommend and does not warrenty this product when oil/
petroleum based products are used when installing this product.
Step 2:
Step 3:
from the back of the tub.
Step 4: Screw on the retainer nut (Item 9) from inside the tub. HAND TIGHTEN ONLY.
If not testing the bath waste, skip to Step 6.
Step 5: Screw the strainer test plug (Item 11) into the strainer body (Item 5) and test
the system. Once testing is complete, remove the strainer test plug (Item 11).
Step 6:
Step 7:
Step 8: Install stopper assembly (Items 1–4) into the strainer body (#5). Note: Items
#1 thru #4 may vary depending on the type of stopper assembly being used.
For Assistance, call:
800-821-8576
Monday-Friday: 7:30 a.m. - 5:00 p.m. CT
Installing the Flex916 & Flex924 Innovator
Step 1: Cut the 1 / " Schedule 40 pipe (#8) and the 1
1
2
misalignment.
Step 2:
Step 3: Secure drain elbow (#7)
the strainer body (#5) through the tub drain hole from inside the tub.
DO NOT USE OIL-BASED PUTTY PRODUCTS: Watco does not
recommend and does not warrenty this product when oil/petroleum based
products are used when installing this product.
Step 4: Place foam gasket (#12)
Step 5:
back of the tub.
Step 6: Screw on retainer nut (#13) from inside of tub. HAND TIGHTEN ONLY.
If not testing the bath waste, skip to Step 8.
Step 7: Screw the strainer test plug (#15) into the strainer body (#5) and test the system.
Once testing is complete, remove the strainer test plug (#15).
Step 8:
Step 9:
Step 10: Install the stopper assembly (#1- #4) into the strainer body (#5). Note: #1-#4 may
vary depending on the type of stopper assembly used.
See watcomfg.com or call for details of applicable patents and patents pending.
1220 South Powell Road • Independence, MO 64057-2724
Phone: 816-796-3900 • 800-821-8576 • Fax: 816-796-0875 • 800-399-2826
®
, verify that this WatcoFlex
(Item 8)
(Item 10) with slot facing downward.
See watcomfg.com or call for details of applicable patents and patents pending.
WATCO MANUFACTURING COMPANY
1220 South Powell Road • Independence, MO 64057-2724
Phone: 816-796-3900 • 800-821-8576 • Fax: 816-796-0875 • 800-399-2826
/
1
2
(#6) under the tub by screwing in
(#11).
(#14) with the slot facing downward.
WATCO MANUFACTURING COMPANY
www.watcomfg.com
®
(Item 6) under the tub
(Item 7b).
(Item 7b).
www.watcomfg.com
(#10) to the
(#7- #10).
(#11).
Direct Drain Tee Models
®
7b
7
Sanitary Tee Models
®
For Assistance, call:
800-821-8576
Monday-Friday: 7:30 a.m. - 5:00 p.m. CT
8
9
10
1
2
3
4
11
5
6
7a
90145 - Flex Inst. - 7/16
90145 - Flex Inst. - 7/16