Page 3
Technical checks and repairs may only be performed by qualified and authorized persons. • Only use the FlexPulse G2 with original accessories. The use of other accessories may lead to a deficient operation and/or will damage the control unit. •...
Instructions for use: FlexPulse G2 Item No.: 451600-0512. Version: 01 Table of Contents Operating Elements ..........................1 Technical Information .......................... 2 Operating the FlexPulse ........................3 Connecting the magnetic field coil ...................... 3 Switching the unit ON ......................... 3 Selecting a program ........................... 3 Setting the intensity ..........................
Instructions for use: FlexPulse G2 Item No.: 451600-0512. Version: 01 Operating Elements Display Program selection key Start/Stop Intensity control ON/OFF Output ports for coils Output ports for coils Page 1...
Only operate the product within the temperature conditions mentioned at this symbol. Direct current (DC)/ continuous current Alternating current (AC) Technical specification The FlexPulse G2 is a Pulsed Electro-Magnetic Field (PEMF) system with 200-300 Gauss (peak) output and 10 programs with different frequencies. Pulsed Magnetic Field Output 200-300 Gauss (Peak)
Connecting the magnetic field coil Connect the cable(s) of one or two coils to the FlexPulse G2. Make sure that the plugs line up with the ports from the unit. It may be best to line up the bottom edge of the coil plug with the bottom edge of the port and then “hinge”...
The battery is fully charged if the battery symbol has reached 4 bars and no longer pulsing. ▪ It is normal for the back of the FlexPulse G2 to feel hot after recharging. The longer it is left ▪ recharging the hotter it may be likely to feel. It will be best not to place the back of the hot...
▪ Coil Placement Although the FlexPulse allows 2 coils to be used simultaneously, it is preferable to use only one coil at a time. When two coils are used, the magnetic field intensity drops significantly, and the battery will drain more quickly.
Page 10
Instructions for use: FlexPulse G2 Item No.: 451600-0512. Version: 01 be considered for any part of the body, including the neck or the head. For the back, chest, abdomen or pelvic areas, coils can be placed centered on the problem area.
Instructions for use: FlexPulse G2 Item No.: 451600-0512. Version: 01 Description of the Programs The FlexPulse G2 has 10 programs. Maximum intensity values apply when only one coil is plugged into the unit. When both coils are plugged in, maximum intensity values are equally distributed between the two coils.
When soiled, clean the unit with a soft, fluff-free cloth. No special cleaning or care agents are required for the FlexPulse G2. Please ensure that no moisture permeates the unit. If moisture does permeate the unit, a technical check must be carried out before re-use.
Instructions for use: FlexPulse G2 Item No.: 451600-0512. Version: 01 Accessories Belt Case (No. 105678) Power Adapter US (No. 104797) Coil Applicator (No. 462202) Wireless Charger Station (No. 104794) Reference Sheet for Battery Retraction and Disposal In connection with the sales of products which contain batteries or rechargeable batteries, we are obliged by law (German battery law §...
Page 14
Manufacturer: Pierenkemper GmbH Am Geiersberg 6 35630 Ehringshausen Germany www.pierenkemper.eu Instructions for use REF 451600-0512 V01 - 2020-06-03...