Do you have a question about the A33 and is the answer not in the manual?
Questions and answers
Summary of Contents for SLL A33
Page 1
These notes are provided free for your use only and should not be reproduced or sold to another party. (Re printed with kind permission of Cleraune Plant Training Limited). SLL PLANT AND QUARRY TRAINING SERVICES LIMITED...
Enough room for material storage and vehicle movements is required. Noise, dust and fume levels should be reduced where possible. Required permits, method statements and risk assessments should be in place. SLL PLANT AND QUARRY TRAINING SERVICES LIMITED...
Follow method statements and COSHH assessments Designated routes- • should be adhered too. This will avoid damaging un-spoilt ground, or completed work, or unnecessary contact will other plant or people Types of Ag Tractor uses and limitations- SLL PLANT AND QUARRY TRAINING SERVICES LIMITED...
Page 4
Check the trailer/implement is fit for purpose and compatible with the tractor and hitch system • Check the condition of the hitch • Line up the tractor and reverse back slowly. If using a Banks man ensure they are in a safe position and use clear communication SLL PLANT AND QUARRY TRAINING SERVICES LIMITED...
Drive slowly when – on rough or soft ground, or slippery ground, when cornering, or using independent braking, CORNERING, travelling on slopes or near ditches or in adverse weather conditions and towing trailed equipment, SLL PLANT AND QUARRY TRAINING SERVICES LIMITED...
Handbrake on and out of gear • • Ensure there is no one in the trench • Ensure any services are propped and secure • Ensure the side of the trench can support the Tractor SLL PLANT AND QUARRY TRAINING SERVICES LIMITED...
Page 7
Never stand with your feet under or near drawbars • Ensure that jacks, skids and other supports are used and maintained • Communicate clearly if you get help with hitching Using External Controls for Three Point Linkage SLL PLANT AND QUARRY TRAINING SERVICES LIMITED...
Page 8
Tie up long hair and cover with tight fitting hat • Do not wear long ewelery • Never step over a Drive line in use or allow anybody else to do so as guards could come loose and spin with the shaft SLL PLANT AND QUARRY TRAINING SERVICES LIMITED...
The ramps should be adjusted to suit the machine • The operators manual should be consulted to find the loading procedures A banks man should be used • The area should be free of people and other plant • SLL PLANT AND QUARRY TRAINING SERVICES LIMITED...
Need help?
Do you have a question about the A33 and is the answer not in the manual?
Questions and answers