Table of Contents
Advertisement
T E L E S C O P I C P O L E C A M E R A – U S E R G U I D E
TELESCOPIC POLE
CAMERA INITIAL SETUP
Attach the DS100 Monitor to the
Camera Pole using the mounting
bracket and star knobs provided.
Do not over-tighten.
+44 (0) 1761 404870 enquiries@dartsystems.co.uk
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
DS100 INITIAL SET-UP
Connecting the interlink
cable
Connect the curly cable
(interconnect cable) to the 4-Pin
socket located on the reverse of the
DS100 and to the connector
located at the bottom of the
Camera Pole.
3
Advertisement
Table of Contents
