Naviecare MG6810 Series User Manual page 12

will be drilled.
Step 2 :Drill hales in the wall and plug in plastic extension pipes, then place the gateway bracket onto
the marked location with holes aligned.
Step3:Tighten the screw.
Place gateway into bracket
Step1: Connect 4G /LoRa/WIFI antennas
Step2: Connect power adapter , put the SIM card into the slot, or connect the Ethernet cable.when
gateway is powered on , check the LED status, make sure gateway is working normally.
Step3: Attach gateway to bracket, make the hook in the gateway align to the bracket grooves, push
the gateway upward(in a direction shown with a blue arrow) and look it to the bracket.
NOTES:
The gateway should be handled gently without violent collisions and drops.

The gateway should be mounted on a flat and dry surface with little dust and good ventilation.

Do not expose the gateway to rain , water leakage and any humidity.
Naviecare Ltd
LoRaWAN indoor gateway_MG6810_User manual_V1.0.0
11
www.naviecare.com