Related Manuals for SteamandGo SAGS3
Summary of Contents for SteamandGo SAGS3
- Page 1 GARMENT STEAMER INSTRUCTION MANUAL MODEL NO.: SAGS3 PLEASE READ ALL INSTRUCTION CAREFULLY BEFORE USI...
-
Page 3: Table Of Contents
Dear customer: Thanks for choosing our garment steamer. For your convenience of operating the steamer correctly, please read the instructions carefully before operation. (No further notice in case of changing of technical parameter) The picture is only for reference. Catalogue Brief introduction ---------------------------------------------------------2 Safety reminder---------------------------------------------------------3 Accessory Drawings-----------------------------------------------------4—5... -
Page 4: Brief Introduction
Brief introduction As a high-grade ironing appliance, the product is applicable to such places as home, hotel. It has compact and light weight design, save storage space. It provides massive high temperature steam, can easily remove wrinkles in short time. It heats up just in short time. Large water tank can steam 40 minutes continuously. -
Page 5: Safety Reminder
Safety reminder ·Don’t use the product before reading the instructions. ·Careful with hot condensed water from steam vent before operation. ·Move vertically to avoid plane ironing which can lead to spray head’s spraying. ·Don’t put it (or be exposed to) in water or liquid. ·Operate the machine with care and keep it away from children ·Don’t add hot water into the water tank, which can cause the deformation of the water tank. -
Page 6: Accessory Drawings
Accessory schematic diagram Part number Name Main body Water tank Steam pipe Spray head Fabric brush Hanger with hook Supporting pole Trousers clamp... - Page 7 Accessory schematic diagram Part number Name Switch Boiler Steam pipe connector Supporting pole hole Drainage cap Base...
-
Page 8: Installation Of Operation
Installation and operation 1、Install two pieces of base on the bottom of the machine by driving two screws. It provides stability of the machine. 2、Insert the supporting pole into the body, and then screw it up with the knob. 3、Unfold the supporting poles to the proper height and fix them. 4、Place the hanger with hook on the top of the supporting pole, and unfold the hanger. -
Page 10: Installation Of The Clothes Rack
Instructions of operation 1：Please make sure the power switch is off before start working. 2：Take out the water tank，turn off the tank nut on the bottom, fill the water into the tank(see picture 1), then tighten the nut(see picture 2). Pay attention to that only can fill cold water, not hot water. -
Page 11: Method Of Steaming
Method of Steaming: 1: The effect of high temperature steam is to soften clothes fiber. If only rely on the steam from the spray head is hard to steam clothes smoothly. Gently pull the clothes surface flat and use the steam to soften clothes fiber is the key to steam the clothes. 2: Attach the spray head to the clothes surface closely, move the spray head up and down gently. -
Page 12: Excrete The Remaining Water In The Machine
Excrete the remaining water in the machine In order to avoid that the user not to use the garment steamer for long time, the water inside will go bad, or provide environment for bacteria to grow. So, there is a drainage cap on the bottom, you can excrete redundant water after turn off the cap. -
Page 13: Storage
Storage 1: Please make the telescopic pole to the shortest, then remove the hose and put it aside. 2: Take the water tank, and pour out remaining water and clean up, then put back. 3: Please open the drainage cap on the bottom and pour out remaining water. 4: Clean the hose joint with clean water, make the hose around on the telescopic pole. - Page 14 Trouble-shooting Facts Reason Solution work 1.Electrical fault; Check maintain completely 2. Attaching plug gets loose; professional staff 3.Fuse burns out; 4.Power light doesn’t work Big noise inside the steam pipe gets bended under Raise up steam pipe to let steam pipe with little horizontal level condensate water backflow into steam out...
- Page 15 Parameters: Rated voltage:110V Steam discharge:35g/min Rated Frequency:50/60Hz Height of whole machine:155cm Output power:1300W Length of supporting pole:120cm Water tank capacity:1.4L Steam pipe length:145cm Packing list Parts Quantity Parts Quantity Body Clamp Water tank Instruction Manual Spray head Warranty Card Supporting glove pole Hanger with...
Need help?
Do you have a question about the SAGS3 and is the answer not in the manual?
Questions and answers