Using Memory - Humminbird DC 5 Operation Manual

Channel 16 is the standard channel for an emergency broadcast. The 16 button selects channel
16 quickly from any other channel or band. If the WX band is currently in use, channel 16 on the
USA band is selected. If you are using the DC5s on the INT band when 16 is selected, channel
16 of the INT band is selected.
Channel 16 represents the same frequency on both USA and INT bands.
If 16 is pressed again, the DC5s will return to the previously selected channel.

USING MEMORY

The DC5s is capable of storing up to 10 frequently used channels from either USA or INT
bands. Memory acts as its own band, so that you can scan between memory channels. Weather
channels cannot be stored in memory.
The Memory function consists of two buttons. M+/- and MEM. To store a channel to Memory,
first select that channel, then press M+/-. The MEM enunciator will appear on the display for a
second indicating that the currently selected channel has been stored to Memory. Continue this
procedure for all the frequently used channels you wish to store into memory.
By pressing MEM, the Memory function is selected and the MEM enunciator will be continuously
displayed. When in the MEM function, only channels stored to Memory will be accessible. The Up
and Down arrow keys can be used to select any channel stored to memory. SCAN can be used
to scan only the Memory channels.
At least one channel must be stored in memory in order to access the Memory function.
Pressing MEM when in Memory will return the unit to the previously selected band and channel.