Revenio Group Ventica Quick Manual

After the measurement
Items needed:
Ventica Recorder
®
USB cable
Computer with access to Ventica Analytics Software
®
and with Ventica Driver installed
®
5 PREPARATIONS
5.1 Connect the Ventica Recorder to the computer
®
using the USB cable
5.2 Open Ventica Analytics Software and log in
®
6 DATA TRANSFER AND ANALYSIS
6.1 Upload the data
• Choose GET DATA FROM THE DEVICE on your
Ventica Analytics homepage
®
• Choose START TRANSFER to start the upload.
Wait until the notification 'The data was
successfully retrieved' appears before detaching
the Recorder from the USB cable.
6.2 Data analysis
• The data analysis starts automatically after the
data upload
• The results will be ready when the status is
'Report available'. This may take up to a few hours.
6.3 Results
• Open the results report by clicking
the respective notification on
homepage.
• View Instruction manual section
7.2 for more information on how
to interpret the result.
• Store the report according to your
organization's conventions.
Consult instructions for use
0598
Icare Finland Oy
Äyritie 22
FI-01510 Vantaa, Finland
Revenio Research Oy, Vantaa, Finland
www.ventica.net
Ventica Quick Guide
®